Recent content by Giorgi13

It has built in 6+2 pin and is capable of putting out 450 watts, and it suffices because I'm planning to get rx 570 or something similar

Image I've tried my best, btw don't have the main component (cpu yet) going for ryzen 2400g because it's cheap in my country. Components list: Deepcool DE600 V2 PSU 107 GEL~34 USD HYPERX FURY 2X8 2666MHZ KIT~65 ISH USD keep in mind shipping cost GIGABYTE A320M S2H V2 (A320 but says it has a b350...

Yeah maximum value 8 is standard and it's already set,if I go below that clock chip controls still won't display

oh wait the clock ratio i think i can change it but i think it cant go above 8 lemme try

i dont even wanted to mess with that setting in the first place, i tried to follow video or something but everyone has clock chip controls except me :(

View: https://imgur.com/dK6quxG View: https://imgur.com/dK6quxG And here are the pics where i try to overclock, please help

Change the thermal paste.

View: https://imgur.com/a/O8PuVga Here's the M.I.T pic

Hello, I've recently grew frustrated over my slow CPU (Q9400 @2.67 Ghz) and decided to give overclocking a try. I'm a very cautious guy i replace thermal paste every 2-3 months, i take care of my parts etc. But i ran into a problem. You see my motherboard Gigabyte G41M-S2PT Doesn't display Clock...

I just found the Solution?(i think). so after replacing hdd i didn't replace my really really old sata cable. and you may now start laughing but i have proof. after I got Disk boot failure message from my kernel power Crashes i and then after messing with hdd cables would turn on hdd again i've...

so recently my pc has Kernel Power crashes. I am using molex to 6 pin connector which is bad but i don't have any other options yet (i'll buy new psu as soon as possible) and i think i might be able to fix it this way: the sata connector which is on same rail as molex connectors to 6 pin. i...

i am more concerned about the fps drops. the CPU isn't getting throttled and everything is fine. FPS drops were occurring when i had 4gb gt430 too. i dont get why it drops after 20 mins.

PC SPECS: Core 2 Quad Q9400 @Stock (running 70-80c at full load while playing GTA V) Gigabyte G41M-S2PT 6gb 1333mhz RAM AMD Radeon HD7770 1GB GDDR5 @Stock (60-65c) Seagate Barracuda 500GB 7200RPM 420W PSU So i switched from nvidia gt 430 to hd7770 and got new hdd. i installed windows 10 and all...

So the real solution is that I reapplied thermal paste and got 80mm Deepcool Case fan. My Cpu temp went down from 75c idle-35c idle 106c Usage-65c usage My gpu temp went down only 10c but it's kinda better now.