Glenwing

Splendid

Joined: Aug 8, 2015

Last seen: 47 minutes ago

Latest activity Postings Featured content About Trophies

- Glenwing replied to the thread Question Incorrect cable. Please use the dual link DVI cable that came with your monitor.
  
  Please see section 0 here: https://forums.tomshardware.com/threads/how-to-connect-to-a-120-hz-display.3268285/
  
  Feb 25, 2025
- Glenwing replied to the thread Question LG GP850 vesa screw length ?.
  
  Should be fine.
  
  Feb 20, 2025
- Glenwing replied to the thread Question LG GP850 vesa screw length ?.
  
  0.8 mm is the thread pitch for M4 screws. The screw length is defined in the VESA standard, it uses 10 mm M4 screws which is what the...
  
  Feb 20, 2025
- Glenwing reacted to aero1x's post in the thread News RTX 5080 is 22% faster than the RTX 4080 per leaked benchmarks — falls short of the RTX 4090 with Like.
  
  damn you complain a lot
  
  Jan 24, 2025
- Glenwing replied to the thread Question Monitor only showing 60hz.
  
  As I said, the 75 Hz option will likely only be available at certain low resolutions, it doesn't support 75 Hz at 1080p.
  
  Jan 22, 2025
- Glenwing reacted to Mager2034's post in the thread Question What is the max resolution on GIGABYTE Z890M AORUS DisplayPort with Like.
  
  the manual doesn’t say hbr3 supported but it says that it can support 2 external monitors running 1440 on dp mst. I assume means that I...
  
  Jan 21, 2025
- Glenwing replied to the thread Question Monitor only showing 60hz.
  
  Unlikely that it supports 75 Hz at 1080p. Generally 75 Hz is only supported on some older CRT formats like 1024×576 or something like...
  
  Jan 19, 2025
- Glenwing replied to the thread Question What is the max resolution on GIGABYTE Z890M AORUS DisplayPort.
  
  I think it should work as long as the first monitor supports receiving HBR3 speed. The second two wouldn't need the higher speed...
  
  Jan 19, 2025
- Glenwing replied to the thread Question What is the max resolution on GIGABYTE Z890M AORUS DisplayPort.
  
  Three monitors at 1440p 60 Hz would require HBR3 speed. But most 1440p 60 Hz monitors would not support this speed, so there may be...
  
  Jan 18, 2025
- Glenwing replied to the thread Question Four 4k 120hz monitor with 1 PC.
  
  You would need two graphics cards. There shouldn't be any special steps beyond that, just plug two monitors into each card.
  
  Jan 17, 2025
- Glenwing replied to the thread Question Recommendations for a DVI-D to Displayport adapter/cable.
  
  Normal adapters will not work for this situation. Please refer to Section 0 in the linked guide.
  
  Jan 14, 2025
- Glenwing replied to the thread Question Display resolution and CPU resolution match requirements & overclocking.
  
  Yes. DP HBR2 and HDMI 2.0 both support 4K 60 Hz. However DP HBR2 bandwidth is 20% higher than HDMI 2.0. They still just say "4K 60 Hz"...
  
  Jan 12, 2025
- Glenwing replied to the thread Question Display resolution and CPU resolution match requirements & overclocking.
  
  3840×2560 @ 60 Hz is still well within the capabilities of DisplayPort HBR2, so should work with anything modern that has DisplayPort...
  
  Jan 10, 2025
- Glenwing replied to the thread Question 4k@120Hz flickering.
  
  High Speed HDMI is not tested up to those speeds.
  
  Jan 7, 2025
- Glenwing replied to the thread Question Kinda weird that it is not the same hz....
  
  If the cable does not have good enough signal integrity the connection will fall back to HBR2 speed, which is max 120 Hz at 1440p with...
  
  Jan 7, 2025
Show older items
Loading…
Loading…
Loading…
Loading…