Recent content by Grahaamh

So problem either with the sata drives or the bootloader. I've just ran windows repair but problem still happening

Yeah it was powered on when it was accidentally unplugged. I've booted it up with a external hard drive and it seemed to be working fine and setting windows up like normal.

No, PC I've build last year all been working fine. PC was plugged out by accident and since then it was stuck in boot loop. When I was checking I noticed it boots fine when I plug out the data connections to the drive. If I plug any of the drives in now. Straight back to boot loop

Whenever I have either of my drives connected to my mobo it's boot looping. Once I disconnect the sata cable for both my Drives it boot into bios perfectly. What could this be ?

Gigabyte b450m ds3H 2x Corsair ddr4 6gb Corsair 650 watt power supply Amd Cpu

Hi my PC build was plugged out of the mains by accident. Since this happened it won't start up I've reset cmos. Reseated gpu, ram. Any idea what problem could be ? Video of issue.

Anyone ?

The power in my home cut out. When my PC started back up it is stuck in a boot loop. It gets as far as the Gigabyte image on startup then powers off. Motherboard has no error screen and I have no beeper. Anyone any idea what it could be ? It's a gigabyte ds3h motherboard 2 sticks of 6gb ram...

Yeah I tried HDMI and dvi both no signal. Computer is powered leds are all lit and all components are powered and spinning. Even Mobo has lights on it powered on. But no post or any signal to screen.

Motherboard: B450M DS3H Graphics card : zotac 1060ti Psu: Corsair cx750m Case: nzxt h500i Ram: 2x 8gb gskill aegis 8gb which I replaced for 2 8gb vengeance ram which was officially supported by gigabyte. Ssd HDD Cpu: ryzen 5 2600 All cable connected. Went through troubleshoot checklist to no...

I've had a problem with my new build it gave no signal. I got a compatable ram as advised by tech support. I have a gigabyte b450m ds3h. I have a new motherboard coming as old one they think may be faulty. Can I get this motherboard to post with just cpu and ram or do I need gpu in it ?

Got onto tech support today, they said it could be a ram compatability issue. Even though i thought ddr4 Rams are all useable for my motherboard apparently not. Either that or faultu Mobo hopefully its just the ram.

Great I'll try that. One question when i start computer everything running fine just no signal. But the one thing I noticed is no power to usb whatsoever is this normal because bios hasn't started up or what do you think ?

What power supply have you got ? Could be that your not getting enough power

I've tried a bit. Going to give it another shot later today. To a breadboard with just a stick of ram, cpu and GPU. If it doesn't work should I just ask for replacement mobo ?