Recent content by gurunaif

My CPU is amd xp2400+ - isn't the only way to unlock the CPU via soldering etc? I'm not confident enough to go to that level of modding. :)

hi, thanks for reply. I'm not sure what the multiplier is. The bios has no explicit setting. The only thing I can play with is the cpu frequency which was 133mhz at default.

Hi, I've added an slk800/delta combo and several fans to my XP2400 based system. My machine now runs stable with a fsb of 147mhz (now rated XP2700). However in order to this I had to up the core voltage to 1.9v and up the ram voltage by 0.1v. My machine is fine and cpu temperatures are contained...

Can anyone help? :(

Hi, I've added an slk800/delta combo and several fans to my XP2400 based system. My machine now runs stable with a fsb of 147mhz (now rated XP2700). However in order to this I had to up the core voltage to 1.9v and up the ram voltage by 0.1v. My machine is fine and cpu temperatures are contained...

Now this really does make sense. I installed a new case fan and improved air flow within my case. By doing this (after a very cold start) I was able to maintain the new voltage for several boots before the problem manifested itself again. With this in mind then what you say about heat being the...

Hmmmm all looks fine in motherboard monitor (psu is 350w enermax e365p): core: 1.69v +3.3: 3.32v +5: 4.96v +12: 12.59v -12: -84.3v values should be within tolerances for e365p???

ak that sucks :) is there a workaround?

I believe its an enermax 350watt (365ep?). I was wondering about the juice - my computer is really loud when I first switch it on (it alsmost sounds like the fan is rising+dropping rpm for the first 5 mins). All started since I added a DVD burner. Now the 350 watt is powering a CD RW,DVD...

yep, was overclocking and had to increase voltage to gain stability at 147mhz. I thought that this was causing the reset problem so rolled back the clock frequency but, left the voltage the same (ie slightly increased). The reset problem still existed.

Hi, I wan't to overclock my xp2400 to xp2800 but, wanted to know what cooler people recommend. (ps availability in the UK is a must). Also, any data available that shows how the boxed cooler performs compared to after market coolers? Thanks and all the best, Naif..

Anyone encountered this? I have a stable system but, if Increase the cpu voltage slightly then xp won't restart. Instead the monitor powers off as usual but, never wakes up. The computer hangs with all drive lights lit up. Undo the voltage change and all is stable again. This is not due to...

Anyone encountered this? I have a stable system but, if Increase the cpu voltage slightly then xp won't restart. Instead the monitor powers off as usual but, never wakes up. The computer hangs with all drive lights lit up. Undo the voltage change and all is stable again. This is not due to...

thanks guys, the problem was a duff second ram chip. I can run@333 without issue when only one chip is used.

When I had this problem it was relating to a dodgy ram chip. So it could be an actual chip fault or the ram clock is turned too high for stable use.