Recent content by Haenastus

edit: i unplugged and re-plugged the fan header as well. i also cleaned out the dust, even though there wasn't much( I keep a clean home! ).

My GTX 780 keeps having fan spikes, in which it will be running at a decent temp.( ~50 C ) and it will ramp the fan speed up to 100%. I tried using MSI afterburner to try and monitor and control the fan speed but with no luck. i tried swapping bios that didn't work either. And yes before you ask...

Thanks so much man, lol i burnt up a wire trying to power it but no biggy!

Yes

How do i power the fan hub? i have a 4 pin to molex but that is obviously not going to power it(by itself), it needs some sort of adapter.

I have an nzxt 200mm fan with a blue LED and it uses a 2 pin connector, i used the 2 pin to molex that came with it to connect it to the PSU but the wire started to melt and obviously got really hot. What is the problem? is there another way that i am supposed to power the LED on the fan? If it...

z87 sabertooth so setting xmp is easy, but even with xmp set it sets the target speed at 2400 and it runs it at 1600, should i set the target speed at 1866? its funny that it would set the target speed higher than what it can handle.

My motherboard's specs say it only goes up to 1866 but my ram has a clocked speed of 2400, will this cause any incompatibilities such as BSOD? also it runs it only at 1600 MHz instead of 1866 how do i change that? also is there any way to get the full potential from my ram?

I'm running this externally lol for now, but does it make a difference that my mobo is only compatible up to 1866 and i have 2400 memory?

On Fri 2/7/2014 12:02:18 AM GMT your computer crashed crash dump file: C:\Windows\Minidump\020614-16567-01.dmp This was probably caused by the following module: ntoskrnl.exe (nt+0x75BC0) Bugcheck code: 0x124 (0x0, 0xFFFFFA8009379028, 0xBF800000, 0x124) Error: WHEA_UNCORRECTABLE_ERROR file path...

Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 Additional information about the problem: BCCode: 124 BCP1: 0000000000000000 BCP2: FFFFFA8009379028 BCP3: 00000000BF800000 BCP4: 0000000000000124 OS Version: 6_1_7601 Service...

Does it matter if i forgot to partition my SSD before starting the windows install, this is a completely new ssd that hasn't been used before.