Recent content by harryhaley16

Ok great thank you so much for your help ill use the Optical Drive cable!

Ok that’s good to hear so I should be able to just plug the optical drive cables in to the ssd even though they have 8 cables in the back and I’ve seen most SSDs with 4? If it doesn’t matter I’ll do that as I don’t think I’ve used it once! Thank you very much for responding UPDATE: The optical...

Thanks for the response! I just checked those cables you’re right they’re not plugged into the motherboard however that’s because they’re an old 3 pin and my motherboard needs a 4 pin. I’ll have a look at some newer fans soon. Thank you though for letting me know but the fans do actually spin so...

Hello, I recently purchased a Western Digital WDS500G2B0A WD Blue 3D NAND Internal SSD 2.5 Inch SATA, 500 GB but don't think i have any spare power cables for the SSD. I have a spare CD drive one which has 8 cables going into the back of it however they normally have 4 in the back for the SSD...

Just fixed it. All working fine now I’m not too sure what I did but I moved some cables into better positions, made sure all the hardware and wires were firmly in place. Thanks for all the help guys!

cin19 Yes I have a Be Quiet 120W Pure Rock Slim. It’s installed correctly as it is all firm in place and the fans spin when turned on. Smorizio Just tried that now and it doesn’t seem to be working either

I can’t even get to the bios that’s the thing. There’s no signal on my monitor. And do you think the motherboard isn’t getting enough power anyway? Which would be the need for the replacement psu?

Old Specs: AMD Athlon X4 880K GTX 1050Ti OC Edition 4gb 8GB DDR3 RAM 1600MHz Gigabyte GA-F2A78M-HD2 motherboard EVO Labs Pentium p4 Model:E-600BR Windows 10 Pro New Specs Intel i5 7600K GTX 1050Ti 2x4GB DDR4 RAM 2400MHz ASUS Z270-a Prime Motherboard EVO Labs Pentium p4 Model:E-600BR Windows 10...

I have just received my new Zotac GTX 1050 ti 4GB OC Edition to upgrade from an integrated Radeon R700 Graphics Card. I followed the steps in the guide when installing the card into the PCIe slot however when I put in the HDMI in to the GTX 1050 ti and powered it up the fans turned on indicating...