Recent content by Hekarizblade

  1. Hekarizblade

    Cpu and ram high usage and low perfomance.

    Thank you guys for the suggestions I noticed that it supports 2gb i was imagining this thing will run 4gb in 64bit LOL Also i will do an general cleaning to reduce heat etc.
  2. Hekarizblade

    can i install a graphic card on my ACER ASPIRE E1-470P, it has a video memory of 32MB only???

    Base on my research you can't upgrade a video card on the laptop instead if you pick at the store and buy it. but if that's in there it's there you can't change it. unless buy one that suits you best.
  3. Hekarizblade

    Cpu and ram high usage and low perfomance.

    I have an an very low end laptop that spikes to 50% to 100% usage and the performance is very slow like the old days. But i only wanted to know that how i gonna make this laptop run smoother.. give me a tips or ideas specs down below and i appreciate any answer will help. Specs: Intel Atom...
  4. Hekarizblade

    3GBs of shared graphics memory!?!

    What kind of computer you using a desktop or laptop? shared graphics memory can't be decrease or increase " in my idea " but it depends in a desktop you can decrease in the bios just look around for graphics and memory but for the laptop i think that is a no..
  5. Hekarizblade

    GT630 overclocking results

    Hi guys recently i overclocked my Nvidia Geforce GT630 2gb Palit edition. i've seen many forums or sites that they overclock the card at their maximum rates but i made even higher overclocking results on this card. This may vary on what type of GT630 card you using it will result different...
  6. Hekarizblade

    Graphics card dead or other issue?

    Maybe the post beep will be the GPU reseat in the pci-e slot or the ram try use 1 stick of ram and try again if still not working try resetting the bios.
  7. Hekarizblade

    overclocking temp problem

    Impressive overclock that's good and yes i would say it's will stay long period of time with lower temperature is better but for now it's good. That problem is solved..
  8. Hekarizblade

    New graphics card made my computer noisy

    Use MSI Afterburner and then click the auto to disable and adjust the slider decrease it because the fan in GPU is automatically at high speed due to high temps that is normal but that is the way to make it less noisy and more temps..
  9. Hekarizblade

    Graphics card dead or other issue?

    My suggestion probably the PSU might be the problem you need more WATTS! like about 650W power supply and extra PCI-E 8pin and 4pin if necessary if your card needed.
  10. Hekarizblade

    Gigabyte graphics card, too loud?

    Use MSI Afterburner and click the auto in the bottom or where is your fan speed option and then slide what percentage you want and click apply and one. DONE!
  11. Hekarizblade

    GTX 660 not on normal clocks

    I think the 2nd owner or you just bought already overclocked the GPU itself that's good so that you don't need to overclock the card itself. your pretty much put it and game on. But you can do still change the stock clock by i think flashing the card and i don't think you wanna do that it's hard.
  12. Hekarizblade

    nVidia Graphics Card doesn't want to be used

    Well that's pretty easy. well your pretty much there. at use global settings instead automatic pick: Integrated Graphics.. select the high end processor aka the GPU nvidia thing. because laptops with dual GPU is set to default as Integrated. This thing will fix the problem i had this problem...
  13. Hekarizblade

    overclocking temp problem

    Well that's good BUTTT! ahem.... you need a better aftermarket cooler i think that's good also a aftermarket Thermal paste i recommend Artic silver 4 thermal paste they have good results at aftermarket cooler with that paste.. Also if you have some bang for the buck for water cooling it is a...
  14. Hekarizblade

    Increasing voltage in MSI Afterburning but GPU-Z is showing the same max voltage for EVGA 980

    Hmmm.. i think that's only a glitched on the msi afterburner application try their latest update or try EVGA Precision X overclocking application. anyway. If your getting stable on these clocks without knowing the voltage going crazy or whatnot well your pretty much good but we need a good...