Recent content by Homeman

What do you mean with smaller? The first connected fitting is angled then there is a brass tube that should feed into the distro plate

Sorry for the late reply. I will buy a flow tester next month to check. Till then, this thread won't be solved I guess

My gpu does not get cooled effectively I think... The gpu hotspot is at 95°C while gaming (critical thermal temperature 100.4%) while the base temperature of the gpu is at 80°c. I think that there is a huge issue with cooling the gpu. The two fittings on the gpu are not on the same temperature...

When I tried to jump start the SF750 with a paperclip, it made a click sound as well. But installed in my system, it worked. Have you double checked all connections?

I got a SF750 as well and it turns the fan on at a specific load in order to remain silent, so it is perfectly normal if the fans don't spin

as of now, the cpu is stable on 70-80°C while gaming. The fittings on the front rad are at the bottom. The system is not booting itself up if you're referring to the video I uploaded. I booted the pc up to show you the bubbles in the system and the water levels in the reservoir

or he could pull out a vom to check if the psu is on load

Right off the bat, the screen looks like you have a defective gpu. Have you tried flashing the bios? Sounds a bit like there could be some incompatibility going on

I am picking up info - piece by piece. I am currently not looking up specific news about hardware. I just came across this announcement and thought "Oh well, people on the net used to say "moore's law is dead"" but then again it is just my own ignorance to talk before making comprehensive...

1) Hotspot temp? 2) If you haven't already tried: Close Afterburner and run the automatic overclock in the amd adrenalin application. Monitor and report

"Moore's law is dead!" yee

I find the amount of water in the reservoir that gets sucked into the system when booting up, extremely weird. Is that normal? usually the system should be entirely filled with water or am I thinking dumb rn?

Parts used ? - Alphacool (ice series) and various other brands fittings. Unknown source of metal tubes, but the material is brass/copper in the entire build. Recently, I switched out a soft tube for a metal tube, re-arranged tubing, re-arranged fan & radiator position at the front panel -...

I have no flow indicator in my loop. If you look at the video, you can see the reservoir. The d5 pump sits right under the reservoir

I used the leak tester from EK to check wether or not there are any leaks. After that I did not bleed the system. Rocking case from side to side while pump is on and air ventilation open? I tried rocking the case from side to side and nothing really changes. The cpu temperature spikes up...