Recent content by HST_James6666

Okay so I got my adaptor back and yes you would have been correct I believe with the first answer it must use a different file formatting system, somewhere in properties it did mention SCSI, whether that is at all related. In order to move it to SATA inside the PC I backed up the data currently...

I did wonder yes it's 2.5" And no nothing in the disk drives section

No it's sata as well... I have checked I'll show you a screenshot but I'm assuming this is what I am looking at and for: http://prntscr.com/ni9n79 http://prntscr.com/ni9ndr Thanks for the help, and yeah that's a good point about how the USB adaptor uses the drive.

https://photos.app.goo.gl/MaLFHREp3P23R8Uy5

Hello All, So currently I run Windows off of a 1TB MX300 and I use some SSD's in RAID 0 for general games etc. While I don't really record my gameplay I do like the idea of having shadowplay running just incase, so rather than having it write to the SSD's I have been using an old 500GB...

Check it works in CPU-Z

Yeah that is how you set the timings, was not sure how it would be displayed. Change the command rate at the bottom to 2 (that is what the 2N meant). As for the speed I said the wrong thing leave that on auto. Goto Frequency/voltage control>Memory configure>DRAM frequency (second down) and...

Did it work?

Corsair CX are fine PSU's however if you do want to overclock you should go for something higher up the corsair range, or seasonic's range

that PSU should be more than enough it will be around 360Watt should always go 20% more to be safe. EDIT: it depends on what make of GPU you plan to use (EVGA, ASUS) what HDD's, also fans and the motherboard, at least push the wattage up to 400 Watt. Also you do not mention what RAM you will use

Right here are the things you want to change in BIOS: Memory Speed: 1600Mhz Timings 10-10-10-28 2N Voltage: 1.5 They are the settings you want to change in the BIOS with the number to change them to next to it. I assume you can do this by changing the top one from auto and entering your own...

Always read oc3d they are easily the best, have a look at the corsair 400r that might do it otherwise h440 nzxt

Sorry svk I mistook you for verbtastic, again blame it on the phone, just read back a bit and seen it was both of you talking about it not just svk

Well done svk that is the third time you have said 4th gen will not work with z67 we all knew that from the start. I believe the build should be fine (dependant on the cooler fitting) also I did take back the speech about getting haswell insted as I did not see what you said at the start.

Chris sorry if I misread but start a new thread with that question. Uplink_svk what do you not understand about what I said about 3rd and 4th gen. Also it is z67 2nd gen. Z77 3rd gen. Z87 4th gen. Z97 5th gen and 4th gen (launched for devil's canyon)