Recent content by iber

yeah, sorry I kinda feel dumb for not trying that first. I pulled the slot#4 with the odd-ball numbers and it's running Blend test now. I'm assuming that the stick must be bad somehow, then? I know Gskill isn't the highest quality. I'm gonna let prime95 do it's thing over night and see if...

I can't get memtest86 to run off boot cd for some reason even with CDROM set as first priority? Is there any other RAM test I can use to test the RAM? or should I just pull the slot#4 since it has those numbers that didn't match? It's running directX 9. Any guidence on how to troubleshoot this?

Drivers are up to date and the resolutions isn't set really high. The clocks settings are all the way down and fan is set to 100%. I don't know if it could be the PSU or not, because someone else built it. But I don't think the PSU would be the reason it won't run prime95 except for in small...

no...that's not an issue at all. I run it on a old 3700+ single core @ 2.2GHz with a radeon 4850 on good settings without any problems. It's either a RAM issue or heat, but I can run prime95 on small fft and only hit 58 degrees. I need to figure out why I can't get it to run Blend or large...

ok CPU: AMD Phenom x4 9750, Agena, 125w, socket AM2+ @ 1.28v 2.4GHz MB: BIOSTAR Ta790GX AM2+ BIOS: AMI ver. 080014 Memory: GSkill 4GB DDR2, dual chan., 533MHz FSB DRAM: 3.8 CL: 5 tRCD: 7 tRP: 7 tRAS: 20 clocks tRC: 31 clocks CR: 2t GPU: Radeon HD 5770 Idle temps are 37-39 degrees C Load...

I will get them you you ASAP i'm on her guest account and cant install CPU-z. I tried running HCI memtest and it froze after a few minutes. Prime 95 runs for maybe a min before it locks up. I will post specs in a few. I wanted to run memtest86 but even with BIOS set to boot from CD first it...

My GF's computer keeps locking up while she's gaming. Doesn't do it any other time. I can't figure out why it's doing it. I can run prime95 on small ftt but anything else will freeze the comp. Temps seem alittle high but I'm not sure what normal temps are for 125w quad core amd CPU's. it...

everything ran great for 4 days but now while gaming it the computer will reset itself. I've tried taking all the settings down but it is still doing it. Can't figure it out at all. I'm running prime95 right now and it has been passing everything so far. Temps never go over 63. Only thing I...

locked PCIe to 33/100mhz set HT to x4 set Vcore to 1.375v set RAM speed to 333mhz CPU mutiplier to 10x set CPU to 240Mhz I got it running at 2.4 now. I can probably go higher if I go to 1.5v. I have a 2 heat pipe heatsink on there, but I just don't want to burn anything up. The only thing I...

advice on O.C'ing? I usually just use the AI boost from BIOS @10% I've tried messing with RAM timings and voltages before but couldn't get a stable setting. Looks like my cheapo dual core will get me by in the mean time while I get a new job since I just moved, but it would be nice if I...

I have a 650w OCz PSU so I should be ok. I'm going to replace the MB/CPU and RAM in a few months just short on funds right now. As long as it will work in the PCIe x16 slot I'm good for a bit even though it will bottleneck slightly. I have a x2 3800+ coming in a few days, right now I'm...

I have an asus a8n-sli deluxe MB, currently running an old HD 4830. Will i have any issues getting a PCIe 2.1 card or am I stuck with using 2.0? I'm upgrading my MB/CPU later and would like to have something newer for the switch