Recent content by Indivision

Let me tell you a secret :P , Silicon lottery also means lower voltage for high frequency, also if 9600k with boost clock 4.6ghz can hit 5.1 there is 85% chance to be able to go up to 5.2 , then 55-60% to go up to 5.3, I am able to reach even 5.4 but on what cost, at the moment the voltage i...

I will recommend to check few things Do One Change by time, if you change one settings restart to see if its stable after the amendment so you know which setting might fail I will suggest first setting the ram and test, to see CPU temps, then start OC your CPU. 1st. Check the thermal paste...

New OC settings i re configured were VCCIO - 1.1 VCCSA - 1.15 Vcore - 1.29 Disabled few other settings, like intel speedstep and speedshift, and boom 75C in prime 95 and 40-60 in all kind of games, from LOL to Battlefront 2 and others. I think i hit the silicon lottery with this cpu 5.1 ghz...

I recently built my new custom loop build, and of course I did overclock my cpu but I am not sure if my temperatures are good for what I have, at the moment I think might be issue with the thermal paste, and i Will check this as also delid the cpu and place full silver or full copper IHS? So I...

I would suggest these settings sync all cores Core ratio 50 Voltage 1.35V max to 1.37V Calibration Load Line (CLL) Mode 2 and if you have a blue screen set it to Mode 1 Put your short duration voltage and long duration voltage to 4096 - just type 5555 and it will maximise it automatically Also...

Hi guys, I am overclocking enthusiast, as I did OC my 9600k stable to 5.1 with full nickel CPU block from EKWB, but my temps are not great as I get 80 C degrees in gaming. So I am considering to delid my CPU , as I have the tool and etc, but also I am considering of buying new IHS, but i cannot...

Ok thanks! I will try now i tested few games no crash no lag not a sigle issue , i did my cpu on 5.1ghz with 1.38v max 78 degrees 1h gaming no issue

Unfortunately in Aida64 it says hardware failure for memory test, but the PC runs pretty smooth I will try different games,

I successfully oc the ram to 3900mhz , 18,20,20,44 , 1.36V DRAM , 1.3V agent, 1.3V viccio what do you think ?

Hello, just yesterday built my new pc full custom loop and when i switch xmp profile on the pc restart several times and then goes to bios, but xmp profile is still on, and if i continue it goes straight to winodws and it shows 2133mhz when in bios is xmp mode .The DRAM Voltage is 1.35 before...

Ok Thank you guys !

Hi Guys, I do upgrade with Ryzen Threadripper 2950x, 2x MSI Gtx 1080 ti Gaming X water cooled, The loop is with 6 fans Corsair LL 120 and i am not sure if my Corsair HX1000i Platinum is enough for this build, if somebody can let me know. I will make the threadripper to work on 4.1ghz!