Recent content by InfernalPhantom

  1. I

    [SOLVED] CPU stuck in Overclocked Frequency

    Thanks for the advice, it seems to better work, if you guys have any advice on what I can change in my bios. I heard that I should change my cpu core/ cache voltage to adaptive?
  2. I

    [SOLVED] CPU stuck in Overclocked Frequency

    So i recently purchased an i7 7700k and ASUS Z270-E from my brother (BIOS is up to date) and i overclocked my CPU to 4.8GHZ(*All cores sync to 48x and power/voltage on auto). My fans can be abit loud at times so I would like my CPU to automatically down clock to obtain lower temperatures on...
  3. I

    Can you plug in an led strip into the GTX 1080 STRIX

    I have heard of a hub of some kind like this one ( http://www.silverstonetek.com/product.php?pid=729&area=en ) that is able to control LED strips with asus aura sync... however I do not know if this is able to sync with my GTX 1080 STRIX's lighting. Also just remember my current motherboard does...
  4. I

    Can you plug in an led strip into the GTX 1080 STRIX

    Do you think there is a was to add an adapter for it to work for rgb strips because my motherboard does not support asus aura sync... or if there is any way at all to plug in rgb strips with asus aura sync.
  5. I

    Can you plug in an led strip into the GTX 1080 STRIX

    I recently purchased the GTX 1080 STRIX A8G edition and was wondering if it was possible to plug in an RGB strip into the two connectors on the side of the gpu shroud. (these are the connectors --> http://imgur.com/a/k6iMg ). And these are the RGB strips I plan to install -->...
  6. I

    My GPU is not going into fanless mode when Idle.

    Anyone know where I can find these settings?
  7. I

    My GPU is not going into fanless mode when Idle.

    I cannot find where these settings are located, it would help if you would tell me :D
  8. I

    My GPU is not going into fanless mode when Idle.

    1. If I adjust the power curve to the minimum and turn off the fans manually ... the card just heats up untill it reaches 80 + Celsius which then automatically my fans turn on. 2. How can I set everything to factory configs?
  9. I

    My GPU is not going into fanless mode when Idle.

    So I bought a GTX 1060 AMP! , which supports a fanless mode when Idle. The problem is that my graphics card NEVER goes into fanless mode and is constantly clocked at 1556 core clock and 4006 memory clock (Even when nothing is open and when my GPU load is less then 5%) . I only have MSI...
  10. I

    Why is my GTX 1060 AMP! never in fanless mode?

    Thanks for the reply, I dont plan on removing my side panel my case has plenty of ventilation. I already reset my curve and it never helps. I dont know why but 1 out of 10 times it goes into fanless mode ( http://imgur.com/a/ovQlB ) and it should look like that.
  11. I

    Why is my GTX 1060 AMP! never in fanless mode?

    So I read that my GTX 1060 AMP! has a fanless mode that turns off the fans when below a temperature threshold, (Yes, I know that idle is when not gaming.. I am roughly on 2-5% gpu load) this "feature" rarely never happens. However yesterday I saw that my gpu was actually fanless and had a 0% fan...
  12. I

    Phanteks PH-TC12DX Confusion

    Thank you, helps a lot! :D
  13. I

    Phanteks PH-TC12DX Confusion

    So i was deciding to buy the Phanteks PH-TC12DX for my LGA 1150 Socket motherboard , but it seems that it does not support LGA 1150 sockets? Some website say it will fit ( NEWEGG ) and some dont say it supports LGA 1150 (NCIX ). I am seriously confused.
  14. I

    Windows 10 Activation Issue

    Just activated my windows by contacting support, gave them my detail and every thing is okay. For others who have this problem just go to the link https://partner.support.services.microsoft.com/en-gb/contact/menu/software/windows/setup/ and select chat, tell him your scenario and it should be fine!
  15. I

    Windows 10 Activation Issue

    And how exactly would I have had linked my microsoft account with my windows 10. I thought all you had to do is just add your account (which is what I did)