Recent content by JakeThaSnake007

  1. JakeThaSnake007

    First Time Builder - Part Review

    ASUS ROG boards are good looking and great quality!
  2. JakeThaSnake007

    First Time Builder - Part Review

    MSI motherboards aren't that great. ASUS is really good in motherboards and has a great track record
  3. JakeThaSnake007

    First Time Builder - Part Review

    and the PSU is borderline. I have the CX750M PSU. the CX series is not the greatest. so If you get it you might want a little head room.
  4. JakeThaSnake007

    First Time Builder - Part Review

    for the price of the motherboard I would get the ASUS Z97 Maximus VII Hero
  5. JakeThaSnake007

    New build does not POST

    try reseating the CPU too. make sure the CPU socket looks like it should as well. look for bent pins. I know the lga1150 socket looks wild and that would be hard to find. But make sure you have the cpu lined up properly. there are two tiny cut outs on the CPU that should line up with two notches...
  6. JakeThaSnake007

    New build does not POST

    try a CMOS reset don't know if it will work but worth a shot.
  7. JakeThaSnake007

    Asus Maximus 7 Hero, How to turn on ROG LED while pc is off?

    my led stays on and the rog led pulses
  8. JakeThaSnake007

    help! Is my CPU or GPU the problem?

    my 4690k during 70% load gaming never goes higher than 40 either. I rarely see this chip even hit 41. But I do have the H100i cpu cooler and run stock speeds.
  9. JakeThaSnake007

    help! Is my CPU or GPU the problem?

    79 is still really safe on an intel. For AMD that is way to high for safe daily temps.
  10. JakeThaSnake007

    help! Is my CPU or GPU the problem?

    intel chips have a higher safe zone on temperatures though.
  11. JakeThaSnake007

    gpu hold up

    well you do always want a quality name brand PSU like Corsair, Antec, Seasonic, etc. and one with an 80+ rating. Off brand PSU's most likely when pushed to their rated wattage will fail sometimes sooner than later, and sometimes can damage the motherboard or GPU etc. when it does fail with some...
  12. JakeThaSnake007

    gpu hold up

    what PSU is that 600 watt?
  13. JakeThaSnake007

    gpu hold up

    the board is the only factor if your looking to overclock. which you bought a "k" edition CPU which will overclock if you wanted to.
  14. JakeThaSnake007

    gpu hold up

    to overclock that CPU you want a Z97 or Z87. But the Z87 would possibly need a bios update to be compatible with the Devils Canyon CPU out of the box.
  15. JakeThaSnake007

    gpu hold up

    you know what? I just googled that board again a saw something different that did't look as bad as what I saw the first time. I must have clicked the wrong link or something. that board will do fine at stock CPU speeds. Still wont overclock very well though