Recent content by Janfactor

If you're still not sure, this was my old setup: CPU: Intel - Core i5-4460 3.2GHz Quad-Core Processor CPU Cooler: Cooler Master - Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler Motherboard: ASRock - H97 PRO4 ATX LGA1150 Motherboard Memory: Kingston - HyperX Fury Blue 8GB (2 x 4GB)...

I mean you could get a Molex to PCI E cable, but if i would be completely honest, i would recommend to get a new PSU all together, it will save you some hassle in the future if you plan on upgrading your PC even more.

That's a molex connector, you need PCI-E for the GPU.

If your case supports 140 mm fans in the front, it will support the X62, look into your manual if you're not sure, if it wont, then there's no way to mount the X62 in the front.

I'm well aware of that, but It's a AIO nevertheless, and will fit like all water coolers. Only thing you might find hard with the X62, is It's sleeved tubes.

Looks compatible to me Picture

Most prebuilt workstation PCs come with a non-standard PSU, so theres a chance your PSU doesn't have two 6 pin connectors. Here's how they should look like (Note that your may be a different colour) 6 pin

That will be more than enough to sustain your needs.

How much does each of the systems cost?

What is your budget?

PCPartPicker part list / Price breakdown by merchant CPU: AMD - Ryzen 5 1600 3.2GHz 6-Core Processor (£194.16 @ Ebuyer) Motherboard: MSI - B350 TOMAHAWK ATX AM4 Motherboard (£99.75 @ Amazon UK) Memory: Corsair - Vengeance LPX 8GB (2 x 4GB) DDR4-3000 Memory (£66.12 @ Aria PC) Storage...

No, you get the RGB version with the Ryzen 7 1700.

The build looks fine, though i would recommend to either get a bigger SSD or a 1TB HDD Western Digital WD10EZEX