Recent content by JKowzun1

  1. J

    [SOLVED] Troubleshooting a Crash

    Just bought a Corsair RM850x (several PSU calculators were suggesting an 850W PSU, even though stating I only use 650W, so I spent the extra 20 bucks on one instead of another 750W PSU), and that seems to have done the trick. Stayed on with no issues through the night. I know I am just asking...
  2. J

    [SOLVED] Troubleshooting a Crash

    If you do know, out of curiosity, what does the 3.3V rail power? You said 12V is a majority of my heavy duty components, like GPU. Is 3.3V powering the RAM at all? If so, that might explain the reboots. It also makes sense, that it is the PSU, since I saw this morning that a white light was...
  3. J

    [SOLVED] Troubleshooting a Crash

    So after looking at my voltages in HWInfo, I noticed after awhile the 3.3VCC (I assume it is supposed to be my 3.3 V DC current output to the mobo) was starting to drop. I noticed it drop initially to 3.008 V (well outside of th -5% range) and then return to 3.3 V, then again to 2.992 V. It even...
  4. J

    [SOLVED] Troubleshooting a Crash

    I just don't understand how, if the fluctuation happens at the time of the monitors losing signal, I will be able to tell if there is a fluctuation? It's not like I can look at my monitors to tell if there has been a fluctuation without a signal going to them, and the signal only returns after...
  5. J

    [SOLVED] Troubleshooting a Crash

    Just making sure, by checking the rails you mean making sure that, when checked with a digital multimeter set to DC voltage, the pins on the 20+4 mobo connector display within 5% of +/- 3.3V, +/-5V, and +/-12V, according to this diagram, where COM is ground, PSU ON and a ground pin are bridged...
  6. J

    [SOLVED] Troubleshooting a Crash

    Replaced my RX480s with an old GTX960 I know works. I didn't see when it happened, but I returned to my desktop after roughly 40 minutes and saw the signal was lost, and mouse and keyboard off, with no response from them when used (caps lock light didn't light up when caps was pressed, and mouse...
  7. J

    [SOLVED] Troubleshooting a Crash

    The link below shows the memtest results. When I initially ran memtest, the same no signal on the monitors happened. From the mouse and keyboard LEDs going off and on again as the fans were ramping up and down, it seems like the computer rebooted a few times while the monitors lost signal. When...
  8. J

    [SOLVED] Troubleshooting a Crash

    Sorry it took me so long to get back to you. Tried booting into safemode, and it crashed while in safemode. Tried removing the overclock on the RAM and it still crashed. Updated the BIOS; still crashed. After updating the BIOS, the monitors lost signal while I was in the BIOS, trying to assign...
  9. J

    [SOLVED] Troubleshooting a Crash

    I'll try removing the OC, as well as booting into safe mode, and let you know if the problem persists. Checking the website, I am one BIOS revision behind, 2 if you include the currently open beta. Would you recommend updating to the current open beta, or sticking to non-beta BIOS release...
  10. J

    [SOLVED] Troubleshooting a Crash

    So my PC just started to seemingly randomly crash starting last night. Was just browsing the internet, looking at nucleotide structures for getting caught up for an internship, when it suddenly crashed. CPU was hovering around 32 degrees C, GPU1 around 42, and GPU2 around 30, so I am near...