Recent content by jordan1794

Update: So running the sfc seems to have solved the issue. In case others have the same problem, take note that you can't run "sfc /scannow" anymore. There is a new command you have to run prior to the "sfc /scannow". From...

My girlfriend's computer recently updated it's windows, and now get's stuck in a boot loop whenever it shuts down. Oddly, the PC turns on but the CPU fans and pump (water cooler) don't turn on. The MOBO codes flash by until it hits "32", then turns off immediately and reboots. It then just sits...

Alright, so I've got a complex issue that I've all but given up on solving myself. PC Specs MB:Gigabyte GA-Z97X-UD5H-BK ATX PSU:EVGA 850W 80+ Gold PCI WiFi Adapter: Rosewill RNWD-N9003 ( http://www.newegg.com/Product/Product.aspx?Item=N82E16833166076 ) OS: Windows 8.1 Pro The internet...

Was googling something else and found this thread lol. I can get 4.9 @ 1.3 vcore, but temps exceeded 80 C (Hottest core got to 82 C) I have since moved and the new place I'm at is warmer, so I can only do 4.7 @ 1.235 due to temperature constraints. (Currently hit 81 on my hottest core) Using a...

Scroll down for TL;DR Alright, so I had previously overclocked my G-Skill Ares RAM from 2133 @ 11-13-13-31 w/ 1.5 v Up to 2600 @ 11-13-15-35 w/ 1.65 v I thought it was stable, and it could pass IBT but I still ended up getting some corruption. But I recently found out that it was my uncore...

Well I got wrapped up and didn't check this thread before putting it in. Everything works fine though, and the cooler master heatsink + fan is insanely overkill haha, barely fit in the case. BIOS Correctly identified the processor and set the speeds (Which is good, because the BIOS on the board...

Hello everyone! My friends computer took a crap and died recently. I gave him a pretty old HP that my wife had from back in middle/high school (Approximately 2008) We have a low end GPU, no idea what it even is but he doesn't want to game or anything, just browse the web and play minecraft so...

As long as temperatures are good 1.25 SHOULD be safe, but as with all overclocking do so at your own risk. With the Nvidia cards they will lower the clock speed when you hit certain limiters. The newest GPU-Z will actually tell you what limiter you are hitting(you can see the codes and their...

Seems within range for normal with 1.27 vcore. But I run 1.25 vcore to hit 4.8 GHz, my prime temps are around 75 and gaming I have seen it hit 70 here and there. You are pushing a higher voltage than me, I have a very good chip but surely you can get the same clock at a lower voltage. My BIOS...

& This is from after I modded my BIOS and increased my voltage:

Green flashes and stars mean you are pushing your VRAM too much, you either have to lower the frequency or increase the voltage (But most 970's and 980's are limited to 1.25v, even with software like EVGA precision) Green squares/stuck pixels/blocks means you are pushing your core speed too...

Current settings(If you don't see a setting here, it's probably on auto, but ask me to be sure, I might have forgotten something) Vcore = 1.265 Turbo boost off CPU multiplier 48 Cache multiplier 44 Vrin 1.05 XMP 1 enabled for 2133 MHz RAM DRAM voltage 1.5 Max temps on Prime95 v26.6 small...