Recent content by josh44361431577

and on back aux port for headphones i hear static and distortion

it's still not working

The case is from NTT systems and the connectors look like this : On cable block of white cable it says L-OUT and L-RET and yes it's other case.

So i recently got new motherboard MSI 760GM P21 FX but i can't figure out how to connect front panel audio and USB. i have old set of case audio jack cables and i don't know how to connect them. The motherboard's manual is useless. because i have older connectors that are not a block.

Okay, now i know everything this thread can be closed now.

Okay, so i got new motherboard (MSI 760GM-P21 FX) and i just can't figure out how to connect front panel microphone, headphone jack. I have some old case and the connectors look like this: View: https://imgur.com/a/aYwPc6g and on motherboard there isn't anything that could tell where these...

I too wanna get new psu specifically a Cooler Master 750 W. But i think it's not psu fault cause all voltages are in 5% +/- range so. i think it might be bios or something i remember placing pc in closet because i overclocked it too much. so it might be bios bricked idk. i will order a small...

My pc has been in storage for 5 years. I tried Removing one stick of ram Checking psu shows only that 24pin atx has a 11.98 V instead of 12V I bought New cpu So its good Idk what to do next. I pluged in 4pin to mobo. Specs: Cpu AMD fx 4100 Psu elementum e2 550w Ram two 4gb sticks of...

it was in closet for like 5 years from now. i changed cpu and applied new thermal paste.

question, on my PSU 12V is 11.97 is it good voltage ? (it's 11-pin on atx mobo plug) i checked it with multimeter and paperclip method. it's voltage is slightly decreased my question is. Is it enough to startup system ???

i will try that thx

Hi, recently i got out my old pc and turned it on. but it isn't beeping it's only spinning fans up and nothing else. i replaced CPU but that didn't worked out. any ideas how to fix that ??? i tried almost everything changing bios battery or resetting jumper nothing worked out

Yes.

Ok, this topic can be closed.

My question, is there any pin out with description? like what pin is ground or something like that...