Recent content by jtromans

  1. J

    B2 error, and only 1 of 4 GPUs showing in Bios

    I tried this both on and off. I also tried setting the PCI-e to Gen 2 instead of Gen 3. Neither made a difference.
  2. J

    RTX 2080Ti works in x8 slot but not in x16 slot

    Were you able to resolve this issue and if so what is the problem?
  3. J

    B2 error, and only 1 of 4 GPUs showing in Bios

    I have tried enabling it, and disabling it. In both situations, it makes no difference.
  4. J

    B2 error, and only 1 of 4 GPUs showing in Bios

    Aside from the motherboard 24 pin EATX connector and both EATX12V1 and EATX12V2 CPU connectors... I have now also connected the PSU to the EATX12V3 (the 6-pin). Unfortunately my error still persists.
  5. J

    B2 error, and only 1 of 4 GPUs showing in Bios

    According to this other thread that I started over at EVGA, I can use a normal 6+2-pin VGA cable by leveraging only the 6-pin part. https://forums.evga.com/EVGA-SuperNOVA-1600w-T2-for-X299-Sage-m2920030.aspx#2920241 The small keying difference I described above won't stop it physically...
  6. J

    B2 error, and only 1 of 4 GPUs showing in Bios

    I use the word triangle here loosely to denote a pin that isn't square. With the clip oriented up: the motherboard is accepting "pins" in EATX12V3 with the Square, Square, Triangle Triangle, Triangle, Square See below: Question: Is it acceptable to connect a PCI-E which is pins: Square...
  7. J

    B2 error, and only 1 of 4 GPUs showing in Bios

    As far as I can tell - I don't have a compatible cable. Do you know which one it would be? Can I use the 'VGA' cables for this? I'm not sure they have the same pin layout as what is needed for the Mobo. Here is a (poor quality) photo of the PSU box and what is included: and here is a picture...
  8. J

    B2 error, and only 1 of 4 GPUs showing in Bios

    Sorry I misread your original post and edited mine to reflect the fact that I have NOT plugged this in. Each GPU is only powered directly from the PSU and I have not plugged in a power cable from the PSU to this 6-pin connector on the Mobo. With everything configured as is I'm actually out of...
  9. J

    B2 error, and only 1 of 4 GPUs showing in Bios

    Thanks for your response. I do not currently have the 6pin power connector plugged in above the PCIe slots, but each card is powered directly. Should this make a difference? Each GPU is plugged in as follows: 8pin and a separate 6+2 pin. I am using separate ports on the PSU for the 8pin and...
  10. J

    B2 error, and only 1 of 4 GPUs showing in Bios

    Sorry I should have said, EVGA SuperNOVA 1600 T2 80+ TITANIUM. Will add to post, any suggestions?
  11. J

    B2 error, and only 1 of 4 GPUs showing in Bios

    Build: ■Asus WS X299 SAGE w/ BIOS 0905 (90SW0070-M0EAY0) ■i9 9900X (BX80673I99900X) ■4x Palit GeForce RTX™ 2080 Ti GamingPro ■GSkill 128GB DDR4 2800MHz (F4-2800C15Q2-128GRKD) ■Samsung 970 EVO 1 TB ■Windows 10 Pro ■EVGA SuperNOVA 1600 T2 80+ TITANIUM Issue: Intermittent (90% of the time) B2...