Recent content by Kalius

I have a splitter that splits my inline mic into male audio and male mic. Here it is: https://www.amazon.com/StarTech-MUYHSFMM-Headset-Splitter-Adapter/dp/B0058DOWH6/ref=sr_1_5?s=electronics&ie=UTF8&qid=1519858983&sr=1-5&keywords=headphone+splitter+startech#customerReviews

Same problem....

Disabling APM with all other power features enabled and HPC disabled works to fix the throttling. My mobo is 970 ud3p rev 1.0 by gigabyte on f2g bios.

Ok, it seemed like I was able to fix this issue by a solution I found on overclock net. I used tip #2 from here http://www.overclock.net/forum/10-amd-cpus/1202751-amd-fx-cpu-throttling-fixes-please-sticky.html, which says to "Get AMD Overdrive and Open and Enable Turbo Core Control then Push OK...

I am overclocking my fx 8320 to 4.2GHz at 1.375 Volts. When I run it through a Small FFT test in prime95 WITHOUT power saving BIOS features, it hits 4.2GHz through the test and remains under the thermal limit. When I run Small FFT test WITH power saving features, the multiplier changes from 21...

In a video I found online, the clock speed continuously changes from 950 to 1072 while running stock voltage. https://youtu.be/bf-HWMfw7Uk?t=249 I must increase the voltage to +20% to have the same effect as him on +0%. When he increases the voltage to +20%, his clock speed stays on 1072...

I am trying to get a stable overclock for my r9 280 Windforce 3x, which comes with a boost clock of 1072 MHz and a core clock of 950 MHz. I noticed that the card would never reach the boost clock, unless I increased the power limit. However, once I increase the power limit, the clock speed jumps...

Yes, the icon appears. I can see mic in port is plugged in. Sorry, I'm not at my PC, I can't tell the settings, but I have messed with them and haven't been able to fix.

I'm trying to get my headset mic to work on windows 7. It shows up in recording devices, and when I click the button on the mic, sound gets recorded. I have ensured that it is: plugged into the mic port, my drivers are installed (MSI 970 motherboard - realtek HD audio driver), and my mic is not...

For your budget id recommend this GPU http://www.newegg.com/Product/Product.aspx?Item=N82E16814150706 150$ is a steal right now plus it has a free game. Might be different if your not in US. Also like deathrabit mentioned you will need a better power supply, at least 550 watts, 600 preferably.

Shit has advanced so much in the last decade :)

Dude, if you can get this 280 for 150$ One hell of a bargain. http://www.newegg.com/Product/Product.aspx?Item=N82E16814150706&cm_re=280_xfx-_-14-150-706-_-Product

Sorry if that's confusing, I think I found a method to lock it at boost clock while gaming using Radeon pro though.

Okay guys, here's my problem. I'm trying to crossfire 2 280s, one xfx and one is gigabyte. The xfx is in the first slot 16x and other is in the 8x slot. Everything seems to work, except the split load and clock speed. When I set the clock speed on the two cards, I chose 1000mhz for each card...