Recent content by King Kevain

That depends, did you set the 1st Boot device to CD in BIOS or do you still have it set to HDD?

Read his to fix your 4th Error - http://www.sevenforums.com/drivers/268212-driver-driver-wudfrd-failed-load-device-error-2.html - also, you could just remove any USB devices at boot and you wont see this - its the Driver for your Transcend 16GB USD stick that's not loading. Error 1 and 2 are...

Sounds like a damaged Hard Drive - can't read the drive to load the OS, but detects the drive - goes into recovery mode thinking you have corrupt files or no O/S installed. Hope you had it backed up

Check Windows Event Viewer - what errors are in there? Look for the Red Critical ones - might give you an idea of what's failing.

I run a H75 on my 4790k, have a low OC, CPU temp hovers around 52-57degC when gaming, but seriously, just add a second fan to the EVO and you'll see an improvement there as well. $10 vs $80 :)

Re GFX Card, your local PC store should have a cheap GFX card - a GT610 retails for about USD30 or something like this - http://www.newegg.com/Product/Product.aspx?Item=N82E16814131626&cm_re=HD5450-_-14-131-626-_-Product - has free shipping - $25

Suggest saving your pennies, and run your games on a lower GFX setting in the meantime.

no, resolution does not determine performance unless you are talking about a particular GPU and you plan on running it at a high resolution that strains the GPU - lets put it another way: A car with a 400hp engine weighs 1000kg and goes 0-100km in 5 sec A car with a 400hp engine weighs 2000kg...

this is a Y splitter - http://www.pccasegear.com/index.php?main_page=product_info&products_id=28288&cPath=1344&utm_source=googlebase&utm_medium=cse&utm_campaign=export_feed&gclid=CJy33P3zjcUCFRWUvQod1XQAJg#googlebase and no, there will be no drop off in fan performance - their wattage is...

Have you overclocked the CPU or GPU? every voltage step up will increase heat...a lot. The EVO 212 out of the box is not the best CPU cooler for high overclocks - good for moderate ones, though you could add a second fan to the EVO 212 - this will give a noticeable improvement to the CPU temp...

I have that Mobo and CPU - I had to update the Mobo BIOS to get system stability as I was having lock ups too - I guess it depends how long your MOBO was on the shelf for before you purchased it - mine was back in DEC 2014 For the mobo to support the i7-4790k, you need at least BIOS revision...

Actually - I couldn't even find a Beep Code list in that manual...strange.

Try switching the fans on the pins first - see if its the MOBO or if it's just the FAN. Not really worth RMAing the board if it's just a shoddy $5 Fan. Also, try changing the BIOS setting for that header from Auto to Q-Fan, Manual or PWM and see if you can control it. Are they 3 Pin or 4 Pin...