Recent content by KittySushi

I found a fix. I'd like to share incase anyone else comes across this problem later: I resetted the CMOS on my motherboard. Reformatted all hard drives and the USB drive. Used another Windows computer to install the Windows 10 USB Boot Utility. I was trying the ISO earlier and it didn't work...

I just thought I would add an update to my situation. I've been at this all day. CMS is now enabled (it wasn't before when I had my SSD and my HDD), and now my bios recognizes the drives without an issue. These are my drives: 128GB SSD (For OS) 1TB HDD (Old one for games, being replaced - has...

I managed to find an old HDD with a Ubuntu partition on it and it boots to Ubuntu just fine. However the other SSDs connected are not being recognized by Ubuntu or being recognized by a Windows USB when trying to do a clean install. I have a feeling it has something to do with how my bios is...

Yes, it is set to boot from storage devices.

I had two hard drives: a 128GB SSD (System Drive) and a 1TB HDD Mechanical. I decided to replace the 1TB HDD mechanical one with an SSD, and that is when things suddenly stopped working. Both hard drives have power and SATA connections. Neither hard drives are recognized on the motherboard...

Yes. The Bracket that mounts the cooler to the MB is loose. I don’t think updating the BiOs would solve that issue

I tested it with another MB and it worked fine, though. I know it’s not the coolers fault.

Got my build up and running last night, and this morning I noticed some inconsistency in CPU temperatures. On idle I get anywhere from 35-45C and under load I get anywhere from 55C to 65C. While monitoring the temps, I touched the AIO heat sink and noticed it wasn’t completely flush to the CPU...

THANK YOU

I just flashed the latest one. I’m not sure if it’s 0805. I’ll have to check

I got my new build all setup and things are working perfectly fine after the PC starts up. I just want to ask a question about something to give myself a little piece of mind. When booting from no power (PSU is switched off, then back on) the CPU light flickers red, the fans spin, and the...

The past day or so I've been getting a burnt plastic smell coming from the area where my computer is when my computer is powered on. I pulled the computer out of its position and inspected all of the connectors in it, only to find nothing. I read online that 9 times out of 10 it's the PSU, so I...

[/quotemsg] this current setup with repeaters or future setup with powerline adapters is never going to be reliable. this is not about IP settings, its about wireless signal traveling from the basement to the second floor. you can try adding a repeater on the first floor, it may help or best...

I recently bought an ASUS N66U to act as a main router and a ASUS N12 to act as a repeater. The N66U is downstairs in the basement and the N12 is two floors up in a bonus room next to an attic where I have my room. The purpose of the N12 was to provide a wired connection to the many wireless...