Recent content by kulharin

cpu is an ice cube. I undervolt and have liquid cooler. Mem test passed with no issues. But when I set my memory back to factory settings and increased the voltage of the memory, the zip succeeded.

Hello, Been trying to do a partitioned zip for 100 gigs. I tried 20GB files, tried 8GB and tried 4GB. tried reducing CPU count and memory consumption. But I get a blue screen of death after about 10-15 minutes. One time I got an error message along the lines that said the process failed...

No base frequency boost with this boatd, but the cpu handles prime tests with a minus 0.100 offset and stays stable n cool.

sorry, I mean is there a benefit of setting a custom curve vs just setting the power limit % ? Or the end result is pretty much the same?

While running unigine heaven I notice setting power limit between 80-120% doesn’t change consumption. It holds at 1100mv… is this to be expected? If I drop power limit lower like 70% then the MV begins to drop but then performance also begins to drop. Is there any benefit to setting up a...

I guess I could always go the other way and apply a negative voltage offset to go cooler n more efficient? Does this motherboard have base frequency boost?

I went manually with +175 on the clock and ran a few stress tests without issue. apparently people are pushing the memory above +1000 ... so is the scanner just super conservative. Funny enough is Skyrim with ENB seems to be a better stress test then the actual stress test. I'll notice...

I passed a 4 hour memtest64 with 15/17/17/35 at 1.445 ... prolly best to leave it at that?

I am not sure how to remove one fan, as all 3 fans are wired together. Should I request different fans or entirely different AIO cooling unit with radiator and fans? Thx

This is frustrating. Yah, sliding the unit back and forth didn't fix anything. tried a peace of rubber foam. Moved some wiring. the air flow harmonics just seem insanely sensitives for the CPU cooling fans than anything other then a few % settings either gives it a higher pitched whistle, or...

Based on Unigine Heaven. Curve doesn't do much. without the OC the clock speed is 3105; with it 3165. Or is this not the best indicator?

The stock is 3200mhz at 1.344 … to drop the timings from 16/18/18/38 to 15/17/17/35 what would I likely have to set voltage to? Or is it more beneficial and easier to hit 3600 at stock timings? Thx

Yah I got G.skills V ram in the rig at 3200. I was able reduce timings a bit without changing the voltage and no issues with mem test. Still a bit annoyed as this CPU with liquid cooling could be OC'd substantially. Although might be for the best, the case seems extremely fickle to air flow...

Hmm I apply on start up and have my profile saved. Any time it restarts the curve and memory are still set but power limit always reverts back to 100 from whatever it’s set.