Recent content by kyle2kxx

I mean, obviously the GPU is working, 120FPS avg in GTAV high/very high settings @ 60Degrees. I'm thinking it may be the PSU cable or maybe the PSU but. my hardware is just 2-3 years old and purchased new. If that helps to know.

damn, very good. GPU and CPU both around 60 degrees Though, it has recently only just started working as it should. So I will check again now. So far: CPU 53 GPU 57 In GTAV

I did yes

1 other thing to note. back on my 7700k, 2 times in 1 day my PC black screened and GPU fans went to full speed? Hasn't done it since. it crashed while loading GTA a few times too (also back on 7700k).

No sag at all Can see GPU-Z here View: https://imgur.com/a/YFlMJ4k

Yes :D Sorry, forgot to mention that

Oh! Yes yes, sorry. Forgot to mention this

Hello all, I have an issue with either 1 of the following. GPU PSU Asus drivers. Specs: PSU: Corsair RM650x (using corsairs "premium cables" for CPU, 24 pin and PCI-E CPU 9600k (was 7700k) RAM: TridentZ RGB 16GB (was Corsair LPX 16GB) Motherboard: Asus z390-E (Was Asus z270-F) GPU: Asus ROG...

Very new motherboard, new build, 7700k CPU. Motherboard reaching 70+ degrees under load. S340 elite case, front mounted Kraken X62, corsair 140mm AF fan mounted at top, corsair 120mm AF mounted at back, stock fans on X62. I contacted Asus about this but still waiting a reply. Is this okay for a...

Hello all, I have a 4790k with a MSI z97s SLI Krait edition, annnd I bought a Kraken x62 cooler so I wanted to try and overclock. I have my CPU @ 4.5Ghz with a voltage of 1.200. I did not change anything else,and the core voltage/ring thing is left on default. so my question is, just to be sure...

Oh, I forgot to include, airflow, I like front fans on full for positive airflow, more air in than out. But isn't this pump designed for variable speeds?

So I bought the Kraken x62 and the only place to mount it is at the front, my question is, as I'm replacing 2 fans on the front which would usually be running on full speed, do I keep the radiator fans on full speed? Because again, as I'm replacing 2 fans that would normally run on full anyway...

But what about installations and copying back and forth from SSD?

Settings up RAID Hi all, I have a SSD as my windows 10 boot device, along side that I have 2 identical 1TB HDDs which I mainly store my games on. I'm interested in running them in RAID 0, how can I do this without messing with my boot device? Will the extra speed be beneficial or should I just...