Recent content by ldehaes

  1. ldehaes

    Question AIO + 4 Fans - How to find the sweet spot under 100%?

    No, the fans are just regular PC fans, which are all at 100%. I don't think there's an option to set my AIO pump speed directly, at least I don't remember seeing it anywhere. That leaves the fans attached to the radiator, which I ended up setting at 80%.
  2. ldehaes

    Question AIO + 4 Fans - How to find the sweet spot under 100%?

    Update: I went with 80% capacity of my AIO after testing loads in the 75-90% range. The fans are all at 100% capacity, since I don't worry about the noise. Used HWinfo to log temps and GenericLogViewer to visually compare the results after using OCCT for "stability tests" on my CPU. CPU: AMD...
  3. ldehaes

    Question AIO + 4 Fans - How to find the sweet spot under 100%?

    What temps do I look for in this case? I have AMD Ryzen 5 7600x3d. Is my setup even capable of cooling the CPU to the effect you described?
  4. ldehaes

    Question AIO + 4 Fans - How to find the sweet spot under 100%?

    I recently watched this video and it made me think about finding the sweet spot myself: View: https://www.youtube.com/watch?v=F7U9QZhulXk How do I go about finding the right constant percentage for myself? The noise doesn't matter in my case, all I want is to keep the average CPU temp as low...
  5. ldehaes

    Question Display not working: default message is "HDMI 1 No Signal"

    The monitor LED. Bottom right.
  6. ldehaes

    Question Display not working: default message is "HDMI 1 No Signal"

    Updated. As for the video connections, I tested them alternately, but at one point I did have both HDMI and DP plugged to the monitor and motherboard at the same time, just to see if it made a difference. It didn't.
  7. ldehaes

    Question Display not working: default message is "HDMI 1 No Signal"

    Hello Recently I started building my own pc, those are the parts I picked. This is my monitor: MSI MAG 274QRF QD E2 I have tried plugging HDMI and Displayport cables, both on the motherboard and GPU ports. But I only ever get a white glowing LED, then splash screen, and after a few seconds...
  8. ldehaes

    Question NZXT H7 Flow 2024 - Fans not working, why?

    Reporting back. The video was very helpful. It turns out I was missing power cables for the CPU. After plugging them in, the fans are now spinning as expected, and I can shut down the power through the front panel button, too. Much appreciated, thank you. :)
  9. ldehaes

    Question NZXT H7 Flow 2024 - Fans not working, why?

    Thank you for the welcome and response. You are right, it's not an actual hub, but a splitter or daisy chain (not sure about that myself), I didn't know the proper term. I don't know how to "short" the pins, sorry. Could you explain? Removing the front panel cable results in the power button...
  10. ldehaes

    Question NZXT H7 Flow 2024 - Fans not working, why?

    Hello, I have built my 2nd PC (or 3rd, not sure) after quite a few years, and predictably there were some roadblocks, and today I'm facing this: my PC fans are not working. This is my build: Motherboard: ASUS TUF GAMING B650-PLUS WIFI CPU: AMD Ryzen 5 7600X3D GPU: ASUS GeForce RTX 4070 Super...