Recent content by legacyBIOS

  1. legacyBIOS

    Will an i7-4770k Be Bottlenecked by a GT 630?

    Usually it's the CPU that bottlenecks the GPU, and it's rarely vice versa. In your case, you may nail the CPU on the head, more than needed, but your card is still very low end so don't expect a high fps. Even if the game uses the CPU a lot, your frame rate is almost always determined by your...
  2. legacyBIOS

    Can't connect a 5.1 headset to a 4-jack laptop?

    If it has the inputs on the laptop, you can tell. Open the realtek audio control manager. It will give you a picture of the inputs with the colors on one of the tabs in the utility. Once you plug one of the cords into an input, the input on the utility will light up. It will take a tad bit...
  3. legacyBIOS

    CrossFire X Problem

    I'm not sure what the issue is. Crossfire is what you need. CrossfireX is for more than 2 cards. Make sure both cards are powered. In GPU-Z, it won't specify the cards are in crossfire, but what it does is give you two of the same card under the selected GPU in the drop down list assuming...
  4. legacyBIOS

    Is it safe buying a PSU from another country?

    I've been using a Rosewill 1000watt for over 3 years now. It's never let me down. You should be good to go!
  5. legacyBIOS

    Windows Phone 8.1 May Support 10" Screens

    This.....this is news right here...
  6. legacyBIOS

    Watercooled HD 7990 buzz when playing games, it's normal?

    that is normal for any card. When your card is pushed to the limits either through benchmarking tests or just playing a game without vsync or a frame limiter, all cards produce some sort of electronic buzz or coil whine. Nothing to worry about.
  7. legacyBIOS

    Upgrading, First time, 1000-1200$ budget.

    Yeah it is all compatible. I would suggest just going with the 4670k instead of the 4770 though. The gains from the 4770 are minimal if any. Good luck!
  8. legacyBIOS

    Why is my G.SKILL Ripjaws X 1866 RAM showing up at 1333?

    In your BIOS, you will find your RAM speed. First, you need to set it to 1866. Then there is the XMP Profile which automatically sets the voltages and clocking settings so your motherboard will run the RAM at that speed. The XMP Profile should be right next to the RAM speed setting, and it...
  9. legacyBIOS

    Cannot connect xbox 360 controller to windows 8 pc

    It sucks to say that you have to have a legitimate wired 360 controller to use it in Windows. If it's a wireless controller connected via a play and charge cord, all you can do is recharge the controller. No way around it. Sorry :/
  10. legacyBIOS

    How much could I get for a 4 month used GTX 690?

    Hey guys. I'm thinking about switching to dual GTX 780s, and I was just curious how much you guys think I could get for a 4 month used GTX 690. It's in mint condition physically and performance wise (zero problems). Thanks in advance!
  11. legacyBIOS

    CPU and GPU Cooling

    Any particular reason you want to liquid cool? It really is more of a gimmick than an insane cooling booster coming from experience. At best, it'll lower temps a few degrees Celsius.
  12. legacyBIOS

    Why is my G.SKILL Ripjaws X 1866 RAM showing up at 1333?

    You have to go into the BIOS and manually set the speed and the XMP Profile that is on your motherboard so it will clock the RAM to 1866. Set the RAM speed to 1866 and enable the XMP Profile for that speed to get those speeds.
  13. legacyBIOS

    PC Gaming Recording Codec Question

    Thanks. Yeah I figured out I needed to compress the video file. Kind of forgot that step lol. Now the 40GB files are down to 1.5GB. Thanks anyways.
  14. legacyBIOS

    Help With Battlefield 4 HD 3000

    Just download the DirectX web installer, run that, and it will install the latest DirectX. That should fix that DX issue.