Recent content by lgoodwn12

Let me ask you a question, what is the purpose to undervolt my CPU? Is it to get the temperature down even lower or what? I know in overclocking the CPU needs more voltage to perform but not understanding how it will help to undervolt it.

Well I've played some games like call of duty & Warface and didn't mess with any settings and things ran just fine so I know I can wait until prices drop on graphics cards thanks for the input tho!

Well I got my computer up and running dudmont and finally got win 10 put on it after hours of work for some reason I couldn't get it to work in raid and I have 2 240gb Kingston sv300 ssd's and everytime i would try to install and load the raid controller it still wouldn't work but I called asus...

That's not exactly what I'm looking for, what I'm trying to find a splitter 2 to 1 USB to plug into from my front i/o USB 2.0 to MOBO USB 2.0 header. my corsair link is plugged into one of the USB headers and one of my front i/o case USB 2.0 is plugged into the other.

Here is what I posted on another forum on tomshardware have an ASUS ROG STRIX Z370-H GAMING LGA1151 motherboard, a Corsair h100i v2 and Rosewill Nighthawk 117. Well my MOBO only has 2 USB 2.0 & a serial port connector (10-1 COM) headers on it and my case has 4 USB 2.0 on the front i/o with 2...

I have an ASUS ROG STRIX Z370-H GAMING LGA1151 motherboard, a Corsair h100i v2 and Rosewill Nighthawk 117. Well my MOBO only has 2 USB 2.0 & a serial port connector (10-1 COM) headers on it and my case has 4 USB 2.0 on the front i/o with 2 cords that plug into the MOBO. My h100i also has a USB...

Yeah I know that cord is for the corsair link software and I want to use it cuz it's very helpful all depending on what type of tasks your doing you can setup different profiles with the fans spinning at certain speeds and the pump moving water through the block and radiator. They have a quiet...

My mobo only has 2 USB headers and my case front i/o has plus my AIO has a USB that has to be plugged in. Is there a connector that I can piggyback both of my USB front i/o USB wires and plug it in to my mobo? My case has 4 USB 2.0 and there is 2 wires that plug in. I'm either gonna only two...

Thanks a bunch in the process of installing everything right probably gonna be a two day project tho cuz having to test fit the rad to see if I can plug all the wires into the mobo. Just a headache cuz I'm having to tell a computer literate person how to build one so takes a little longer then...

Do you reccomend using the pre applied TIM on the H100i or should I clean off the TIM and apply the artic silver that I have?

Ok will do probably won't be for a week or two cuz I'm gonna start on my 8700k this weekend. What does TIM mean tho? Are you referring to the thermal paste?

Since the FX-6300 is a lower voltage chip won't it keep cooler temperatures especially since I'm only using the h80i? But I'm gonna try and use the FX-8350 and since its going to my lil brother who isn't going to keep an eye on temps and stuff I'm not going to overclock it I think it will do...

Ok I'll try the steps you told me to try. I was already on that path to do so anyways a couple of months ago but just never got around to it. So I just bought a new rig cuz my other lil brother needed to upgrade his rig. I actually bought a kit of Arctic Silver 5 thermal paste with ArctiClean 60...

My problem is if i play Warface for maybe 5 to 10 minutes my pc automatically shuts off and i have to wait for a minute for to cool down to turn it back on. If i convert a movie and it takes %40 to %60 cpu usage i watch it grow in temperature up untill it get to like 80°C - 85°C it shuts down...

Well thanks I very much appreciate the work you put into helping me out and research you've done. I bought my PSU, MOBO, cpu & AIO off Amazon cuz they had better prices plus I have prime then i bought my ram & case off of newegg cuz they had the case marked down to $68.99 plus i had a $35 off...