Recent content by liquidimports

My setup: AMD Ryzen 5 2600 6-Core 3.4 GHz (3.9 GHz Max Boost) Processor Zotac RTX 2060 Super 8GB GDDR6 Graphics 16GB Crucial Ballistix Sport LT DDR4 3000 MHz Memory 500GB Seagate BarraCuda Solid State Drive Intel 660p Series M.2 2280 1TB (SSDPEKNW010T8X1) Thermaltake H200 TG RGB Case Wraith...

Cooler was not attached tightly. I could move the fan up and down about 1/2 inch. The Fan wasn't clipped all the way. I clipped it and secured the fan to the CPU. I downloaded Core Temp and both of my cores are running a little hot I think 50-70 C. Should I re apply the thermal paste?

Can slightly loose cpu fan cause my computer to freeze?

New build. The only thing I have attached to my mobo (sitting on a mobo box) is 24 and 4 pin connectors, CPU with heatsink, and a system speaker. CPU fan turns on (by applying screwdriver to power on pins) as well as case fan (if I plug it in). No video, no POST. I plugged and unplugged...

tried it all, same results

yes the CPU fan works with just 24 pin power cable. Any ideas?

Alex, without PCU? I also had my psu set on 230, could they have been an issue? I'm in USA

yes, PSU is working fine

I just bought a new mobo and cpu. After installing I checked to see if it works but the cpu fan started to spin for a second and then it died. I reconnected and disconnected everything multiple times with no luck. its not turning on at all now. PSU is working fine (tested with a paper clip) Any...