maraxion's latest activity
-
Mmaraxion reacted to Eximo's post in the thread Question Fan hub, different type and size fans. with
Like.
Not sure I can explain it better. The fan doesn't know what percentage you have set. It is getting a PWM signal or DC voltage from the... -
Mmaraxion replied to the thread Question Fan hub, different type and size fans..Correct. The controll port goes from motherboard and identify the fan in port 1. The other fans on the hub wil then receive the same...
-
Mmaraxion replied to the thread Question Fan hub, different type and size fans..So all fans wil reach their own individual % and in that it does not matter which fan is connected to the controlling port as long as...
-
MHi. So iv got a few pwm fans laying around. They are of different size and rated at different DC voltage. Iv now ordered a hub, in my...
-
Mmaraxion replied to the thread Question DisplayPort bent connector ?.Don't have that option I'm afraid. But the lines issues I'm having is only when using DP port. I'm guessing this is a likely culprit...
-
MSo iv gotten a second hand 2060 super that displays red horizontal lines only on DisplayPort. So I took a peak inside the DisplayPort...
-
Mmaraxion reacted to Aeacus's post in the thread Question New build, new fan hub - - - - how to deal with PWM and DC, and what fans to use ? with Like.
3-pin DC fan, in PWM mode, still works, but it will run 100% at all times and there is no way to reduce the fan speed. So, generally...
-
Mmaraxion replied to the thread Question My rig didn't start after reboot. Now wil not turn on!.Yea I can do some testing, but I have no post so booting from usb is impossible. But the mainboard light up on "VGA", which would...
-
Mmaraxion posted the thread Question My rig didn't start after reboot. Now wil not turn on! in Systems.Hi. So i was making my comuter ready for sale. I put an graphic card in, and changed the psu. Both parts worked 2 days ago. I started...
-
Mmaraxion posted the thread Question New build, new fan hub - - - - how to deal with PWM and DC, and what fans to use ? in Cooling.Hi. So iv got an phanteks enthoo pro case with an asus card with a 4 pin header. I then ordered a cheap fan hub the "arctic case fan...
-
Mmaraxion reacted to Darkbreeze's post in the thread Question Phanteks enthoo pro or cm storm stryker with Like.
It is. And, it's ok. I agree. LOL.
-
Mmaraxion reacted to geofelt's post in the thread Question Phanteks enthoo pro or cm storm stryker with Like.
If you like manual fan controls, buy a 5.25 front panel fan controller like this for the phanteks...
-
Mmaraxion replied to the thread Question Unsure on ram RGB pro vs lpx. Which version is best.I would but I already own these kits. I know it should be quite possible to oc to around 3200 so hoped for tips from those with more...
-
MSo iv got 2 sets of Corsair ddr4 memory, both 2x8: 1. Corsair vengeance lpx 2666 cl16. V 3.21 2. Corsair vengeance RGB pro 2666 cl16...
-
Mmaraxion replied to the thread Question Phanteks enthoo pro or cm storm stryker.Hey Darkbreeze, since you have worked on this enthoo before I wanna ask you about the mb risers. The center riser is different, almost...
Facebook
Twitter
Instagram