Recent content by Marco_on_the_Grassland

  1. M

    Question 2-pin connector ?

    Thanks for your help! I've found one item that matches what I'm looking for: https://www.jst-mfg.com/product/pdf/eng/eACHL.pdf?67fe9ca2e9a32 It seems the housing (cable side) in the photos I post earlier won't fit the connector in the diagram due to a shape difference. However, I could resolve...
  2. M

    Question 2-pin connector ?

    Could you point me to a website that sells SMT receptacles and connector housings like the ones shown in the attached images? Of course, if they aren't available, I understand that I can replace both the receptacle and connector with a more common low-profile horizontal type. However, if the...
  3. M

    [SOLVED] Can't see legs: Microsoldering ?

    Thank you for your prompt reply. I will try out that product right away.
  4. M

    [SOLVED] Can't see legs: Microsoldering ?

    In the 61-pin FPC connector (the photo attached), 30 or 31 pins are aligned face-to-face within a width of far less than an inch, so 0.01 inch per interval of every 2 pins. The photo captures the BACKside view, and when seen from the front or directly above, the pins remain invisible. How can I...
  5. M

    [SOLVED] Differences between these two WiFi cards ?

    Thank you for your prompt response. I'm very satisfied with the explanation.
  6. M

    [SOLVED] Differences between these two WiFi cards ?

    Hi. Could someone tell me about the difference(s) between these two models: Intel Tri-Band Wireless-AC 18265ngw and: Intel Tri-Band Wireless-AC 18260ngw? Thanks.
  7. M

    Question Looking for a cable

    I'm looking for a product of an internal computer cable with 0.3-mm intervals and 61-pin contact its both ends with contacts (solid and flat) like an FPC cable, but with separate 61-lead regular, flexible and thin wires between the terminals. Its full length could be ~6 inches enough. Thanx...
  8. M

    Question How does it work: HP Elite x2 1013 G3

    I know, I know for each res each (different) display model...sorry if I wrote something misunderstood. My question is just if 3,000 * 2,000 res is possible via 30-pin eDP, because my understanding is it requires 40-pin connection for resolutions higher than FHD (more than two lanes).
  9. M

    Question How does it work: HP Elite x2 1013 G3

    HP Elite x2 1013 G3 is a 2-in-1 slate computer and has two resolution models: 3,000 * 2,000 (UHD) & 1,920 * 1,080 (FHD). ANY model however has only a 30-pin eDP output (to LCD) on its mainboard. My understanding is it requires 40-pin connection for resolutions higher than FHD (more than two...
See more
COMPANY
RESOURCES
FOLLOW
Top Bottom