Recent content by Marty Poo

I have removed the cooler and CPU, no bent pins, Re-fitted CPU and cooler, inserted the RAM into A2 & B2, computer did not boot straight away however when I applied a little bit of pressure to one side of the cooler evryhting worked and the computer booted up, The cooler is a MSI MAG 240mm...

If I put a RAM into B2 only the computer will not boot. At the present time the computer will only boot with a RAM in the A2 slot only.

The following RAM is fitted: DDR5 PC5-44800(5600) CMK32GX5M2B5600C36 The RAM boots as XMP Both RAMS work in the A2 slot At the present time the computer will not boot with both RAMS fitted. I have not tried booting with a RAM in the B2 slot only. Should it be able to boot in that...

That is correct, but I am wondering whether the MB should have power to both CPU Power connectors ?

It is a Silent Pro Gold 700W PSU

I have built a PC with the following: MSI MAG Z790 TOMOHAWK DDR 5 WIFI MOTHERBOARD Intel I7 13700k CPU 2 X 16 GB DDR 5 RAM ASUS GEFORCE RTX 470 GPU 700W PSU Initially the computer would not boot with the RAM in A2 & B2 slots. I had to remove the RAM from the B2 slot and then Boot the computer...