Recent content by mAs_81

Mr Gerow, don't you believe that it's time for all manufacturers to include sleeved cables with PSUs?

I'm using Trixx and I have a custom fan curve

I understand that but since I do not have the smart fan on,and as we are speaking the fan speed is @ 100% , plus the fact remains that it didn't do that before at all , clocks and all , I still think that something could be wrong..

Hello everyone.. I'm having a problem,that I do not think is normal..This has been going on for some time.. So,as the title states;when watching YouTube videos on my 2560x1440 monitor,while browsing online on my 1920x1080 one , I noticed that my Vapor-X LEDs turned yellow because it was running...

Hey , sorry it took me so long to get back to you , I was away from a pc for a while..The BIOS version is P1.40. I've already contacted my seller for a rma , noticed some bent pins too.. It's not my first ball game , I'm certain it wasn't me who did that,hope they accept it..

didn't want to choose the best answer , sorry brainfreeze :p I have tried a lot of combinations of peripherals but I always got the same beep .. I wanted to try Z97 chipset because my GA's getting the voltages all messed up

Hello guys , I tried to install this m/b in my rig , but I get no post .. It boots,and for 2-3 seconds all fans are working @100% , then reboots , and I get a black screen and four long beeps After googling around I found out that 4 beeps is system timer failure(?) apparently and/or faulty...

I think I'l do that..I just staed =having BSODs when gaming with this as the reason : "This was probably caused by the following module: hal.dll (hal!HalBugCheckSystem+0x1E3) Bugcheck code: 0x124 (0x0, 0xFFFFFA800D121028, 0xFF800000, 0x124) Error: WHEA_UNCORRECTABLE_ERROR file path...

I have the gigabyte Z87M-D3H...I've tied resetting CMOS and loading defaults but it messes up my volts..I have the latest F11 BIOS. It says that my m/b sets VCore to 2.220V..It maybe a sensor error,I know,but in HWinfo it states that my Vcore is that much., and has my correct volts under Core #...

Hey guys.. I was thinking of changing my m/b to a ASRock Z97M Pro4 for my 4790K , because my current GA m/b has all the voltage messed up.. I looked on the Memory Support List and my current Corsair MY8GX3M2A1600C9B Vengeance Pro ram are not on it.. I know that it is not possible to list each...

Yes,I have a custom fan curve setup via Sapphire Trixx,nothing is overclocked atm

Nope.. I reseated everything more than twice,changed cables,took the gpu out,no dice

Hey guys I'm having a peculiar problem.. I always had an idle temp of max 45c on my Sapphire Vapoor-X 290,but today after I unplugged everything to fix the cables and clean my desk,it idles @ 55-56c.. I have a 2560x1440 monitor connected via dvi and a 1920x1080 tv monitor connected via hdmi...

Thank you!! I wish that everything goes well indeed.. Again thanks everyone for the quick responses, I'll pick the first post for my solution since everybody here agrees that I won't have a problem. Cheers..

Thank you for all the quick replies @Ytyoussef The thing is that the 4670 is locked and I'd like to give a shot at overclocking again(last time I was into these things,it was at LGA775 socket) The chip won't go to waste-I'm keeping it for a HTPC build I'm planning for my new living room in the...