Recent content by maxrena

Help please...

Correct. But I just tested, and strange thing happened. If I put sticks in A1 B1 E1 F1, nothing posted on screen. Edited: A1 E1 won't post too.

Here are my specs: Motherboard: Supermicro X10-DAi CPU: Intel Xeon E5 2698 v4 Memory: 64GB (2x32GB) DDR4-2133MHz PC4-17000 ECC RDIMM 2Rx4 1.2V Registered Memory for Server/Workstation The problem is, I follow the instruction of the manual But my motherboard only recognized one stick of...

This is my adapter card Speedbyte Dual M2 PCIe Adapter, M.2 NVME SSD (M Key) or M.2 SATA SSD (B Key) 22110 2280 2260 2242 2230 to PCI-e 3.0 x4 Host Controller Expansion Card with SSD Fan Cooler Heatsink for PC Desktop, Black windows 10 1909 as well

It needs not to be using what option to boot. That's just as easy as you choose it right on the screen when the screen first posts. No need to go all the way to the BIOS to boot it, just F11 and choose.

Yeah, so what's the difference between the DVD and the USB? Both use SATA ports to transfer data. What will make the DVD work but the USB no? And one more thing, have you really seen that error I posted above? That error states very clear that the error comes from the type of the SSD or the...

That doesn't make any sense. Because the problem come from the motherboard not allowing the SSD, not about the way of the data coming from (i.e USB or DVD). I tried that on other motherboard too. At first, it behaves the same, but after the configuration changed, I can install it. This...

USB drive. Of course I already had a NVME expansion card/adapter, the windows installation recognized the drive, but not letting install windows on it.

I think I should try the PCI x16, I was using PCI x8. Of course I already had a NVME expansion card/adapter, the windows installation recognized the drive, but not letting install windows on it. Updated: Tried, still not working

I tried the easy way, it didn't work. It showed the error as I posted above. That's why I have to find the other way or something else that I missed. And the instruction mentioned about the PCIe/PCI/PnP, that is under the Advanced Setup Configuration tab.

This is in the Advance setup config. And the boot mode is UEFI already.

I followed all of them, here are my screenshots of my BIOS settings

The PCI lanes are configured to EFI. But the SATA only has IDE, AHCI, RAID. I dont see any of the options you said.

SSD: Crucial P1 1TB 3D NAND NVMe PCIe M.2 SSD - CT1000P1SSD8 Motherboard: Supermicro X10-DAi CPU: Intel Xeon E5 2698 v4 Here is what I found about configuration for windows 10 installation on supermicro motherboard https://www.supermicro.com/support/faqs/faq.cfm?faq=22269 I followed the...