Recent content by maytiffins

The SATA controller for the M.2 drive has one SATA port, which I am using to connect to a HDD. The cable is in the way of the 980ti due to the placement of the port on the motherboard, not the M.2 drive. I plan to use the card to do some rendering work and some AI implementations. The 16GB of...

Yes I did consider that, until I realised that my Benq monitor could only use its maximum resolution (1080p @ 144 Hz) over DVI, and otherwise would be capped at 60 Hz. I updated the chipset driver and BIOS to F31 which got the Radeon VII to work on the 3rd PCIe slot and starts without errors on...

For some reason it works when the riser is in the first (16x) slot. I’ll go through the BIOS to see what the options are that are making it stop working in the third slot

I have been testing various arrangements, the Radeon VII works when plugged into the motherboard, but not the riser. The 980ti works with either. All those tests were with one GPU at a time. The Radeon VII also works with the 980ti on the riser while it’s on the motherboard. I have got a 1000W...

I have not been able to run anything on the Radeon VII while it has been on the riser as the error is on startup. I have a bequiet 650W power supply that was using 305-315W without the Radeon VII

I am using a Radeon VII for compute alongside a 980ti which I am using for display. I have connected the R7 to a 1x riser however it is having error code 43 in device manager. The card was working fine in another computer and there were no errors I have tried using the latest drivers (19.6.2)...

I am running into some problems when trying to connect two routers to my existing internet connection - I have two TG797n v3 routers which I am trying to run separate networks on. The existing setup consists of a switch connected to the ISP modem. The two routers are plugged into the switch...