Recent content by medlyby

get the single channel for the time being, then you can ugrade to 32gb later, and 40% thats a good deal not to throw away.

So finally I bought new Ram patriot 4Gbx2, changed the RAM did the tests and VOILA all works fine. I think everyone of you guys for your precious help and God Bless you, may the PC MASTER RACE blessings be bestowed upon you and all your familys, REALLY GREAT THANK YOU (y) :) (y)

Impossible my country is out of RMA reach, so I going to buy a new Ram for the time bieng an A-data XPG V2 1866Mhz 2x4Gb sticks, and thta's the best offer I can Get in my country, BTW I live in Tunisia north africa :) , and really Thanks for your help guys your a blessing from the heavens (y)...

Update so far on the new testes I've done, T1- I tested my RAM : (DDR III 1600 Mhz Gskill memory module) on one of my friends desktop, I couldn't RUn a MEM86 test cause he uses his pc's for work and it takes at least 4 h test run, so I used the windows meme diagnose tool : R1- The result was ...

SO I ran another Diagnostics after changing the Paste, whith the CPUID open and when the test for CPU load began the TEMPS hited the 100 °C and the test GOT a FAIL imidiate FAIL. SO I think it may be the Stock Fan who don't worck well. What do you think Guys ? and if it is so do you recommande...

this is the CPUID temps for Idole : link : http://i.imgur.com/6fhf7Rg.png it sits between 37 42 45 degrees C but why when I open my BIOS MSI thingy I get 60 degrees ?

OMG, it's just like you said Maikutech, SO : -1- today after I seen the results of the intel diagnostic I thought to myself : so let's try and chance the thermal paste, and like you said I have a stock cooler. -2- I both a new thermal paste, instaled it for the first time of my life, and boy...

I decided to RUN n intel diagnostic for my pross I got a fail due to tempreture problems, this is the test logs : (would this be the problem causing Blue screen I meen the source ?) --- Temperature Test --- ... Version 1.0.12.64b.W ... 49 degrees C below maximum Test Result - PASS Expected...

I have donne one run 4 passes test and I've got 6600 some errors this is a link for the report. the report link : https://we.tl/lQLO4KThP2 I couldn't do more, family needed my desktop to work.

I remenbered another think, supposing that my RAm is failing and I try to update my BIOS would'nt it be possible that the failing RAm would corrupot my BIOS update and FAIL my MOBO ?

I don't think I have the latest BIOS, FOR the DRAM as I told you its a G.skill Value 8 gb DDR3 1600mzh CAS 11 for more information this is the link to it's full spec sheet in pc part picker : https://pcpartpicker.com/product/4sDwrH/gskill-memory-f31600c11s8gnt and thanks :) .

MOBO : MSI Z97 PCmate CPU : i7 4790k RAM : 8gb 1 stick G.skill Value GPU : MSI GTX 970 4G gaming PSU :XFX TS 75080+ bronz That's my config, and thanks for your help :)

Greeting to everyone : I'm getting a blue screen with this message on (page_fault_in_nonpaged_area) ; So I began my research this lead me to the possibility that : - it could be driver related , so I checked all my hardware driver and all are updated == status OK, but bios driver I didn't...