Recent content by Mewpman

  1. M

    Question HP pro 3125 MT memory issues

    Hi yes, bought from suoplier at the same time, all the same brand, speed and type.
  2. M

    Question HP pro 3125 MT memory issues

    Hi All, I have a RAM issue with the above tower, I have two blue and two black slots, i have 4x 4 GB DDR3 sticks bought at the same time and are all identical. i Can get the tower to boot ok with any two sticks in either pair of slots, but..... with all four fitted the fans start but will not...
  3. M

    [SOLVED] Lenovo M700 tower fitted with Nvidia GT630 gpu, starts up with screen output on vga or hdmi connector, GPU fan spins...

    Hi again, I have just tried a dvi lead instead and am getting output ! i think the issue is where the gpu sits on the rear panel the gap doesn't allow full insertion of the hdmi plug, the plastic moulding of the plug touches the rear panel. maybe i'll try and file it to fit? is there any...
  4. M

    [SOLVED] Lenovo M700 tower fitted with Nvidia GT630 gpu, starts up with screen output on vga or hdmi connector, GPU fan spins...

    Hello again, i can't see a tab to add photos. The Lenovo M700 has a 250 watt PSU(intel i5 6400). The HP PRO 3125 has a 300 watt psu (amd athlon x2). would 50 watts make a difference?
  5. M

    [SOLVED] Lenovo M700 tower fitted with Nvidia GT630 gpu, starts up with screen output on vga or hdmi connector, GPU fan spins...

    will do, and i'll compare it to the HP Pro 3125 that it worked in when fitted.
  6. M

    [SOLVED] Lenovo M700 tower fitted with Nvidia GT630 gpu, starts up with screen output on vga or hdmi connector, GPU fan spins...

    just the power and hdd led and the various fans including the gpu one come on. the only gpu out i haven't tried is the DVI as i don't have a lead.
  7. M

    [SOLVED] Lenovo M700 tower fitted with Nvidia GT630 gpu, starts up with screen output on vga or hdmi connector, GPU fan spins...

    just to avoid confusion in the original post, starts up without screen output when the tower boots :)
  8. M

    [SOLVED] Lenovo M700 tower fitted with Nvidia GT630 gpu, starts up with screen output on vga or hdmi connector, GPU fan spins...

    Hi, thank you for replying, i have checked the bios settings for this both this and Pci-e speed and both are set to auto
  9. M

    [SOLVED] Lenovo M700 tower fitted with Nvidia GT630 gpu, starts up with screen output on vga or hdmi connector, GPU fan spins...

    Hello all, I know the above GPU isn't going to win any plaudits, but... I have had this gpu work fine in an old Dell XPS 525T and recently a HP PRO 3125 mt. I have just aquired the M700 lenovo tower and cannot get any joy from it once the gpu is fitted. Even connecting a vga to the mobo with the...