Recent content by Michal_8

Try to download the original driver from the Realtec site it solven my issue also the front panel is now working IF you want find your audio chip in the list or if the driver didnt detect your chip try this one .This is what i have used to fix the issue ...

I am using the Alpenföhn (EKL)120mm Wing Boost 2 Plus PWM Volume: max. 18.2 dB (A) Speed: 500 - 1,500 r / min Air flow: max. 106 m³ / h I am using them as Case Fans also for CPU cooling (Scythe ninja 4 cooler) and also for GPU (raijintek morpheus cooler) at full speed i cant hear that something...

try to switch the last 2 pins in your FAN connector(PWM3th pin with sense 4 pin) you should be able to control the fan speed after that>D

Depends on the connector where you want to connect it some motherboards have deferent Pin-ou for CPU and different for system Fan connector try if you connect the fan and it will go on max RPM try to change the last 2 pins on the 4 pin Fan connector (switch the 3th PWM and 4 th pin sense) it has...

Connect the Fan on molex cable for power(first 2 pins) and use the PWM or sense pin(3th and 4th pin) and connect it to the third pin on the mobo You need to test one of the options will work as for me I have 2 fans controlked by motherboard booth powered up from molex and to control them via...

If the Cpu get too hot it will shut down no wories u wont melt ... the air 240 is designed for wathercooling so why u dont use the original water cooling ? .......a lot of AMD's didnt show corect temp mine 860K have in 4 programs 4 diferent temps and non of them is correct if you want to be...