Recent content by mircea.anton99

I opened the PC plenty of times and searched for it but i can not find an m.2 slot anywhere... I may just be blind but i dont know what to say

The prebuilt is a HP Prodesk 600 G2 The card is: https://www.delock.de/produkte/G_89370/merkmale.html?setLanguage=en

I have a relatively old prebuilt system that has no m.2 slots on the motherboard. I found online some pcie cards that can solve this issue. However i am not sure of the specifications on my motherboard since it's proprietary hp hardware. All i know is that the pcie slot is the same size on the...

At least in my local shops, i failed to find any regular tower that have 3x 120mm fans in the front all while being under 20cm thick. Anything thicker than 20cm and taller than 50 wont fit

It has the fans on the sides so that is definitely a no-no since there will be like 3 cm at most on each side

So i plan to build my "workstation" PC inside a horizontal case. My concern is with airflow. The shelf I will put it in is 50cm wide and 20cm tall. I was looking at the Silverstone GD08 case which is 44cm wide, and it has lateral fans. Are 3cm on each side sufficient for proper airflow? The...

I am going to get a GoPro Hero 6 and I will be recording 4k 60fps. How much storage will i need? I don't want to get a couple TB "just to be sure" since i am going to get SSds and they are quite expensive. I'm thinking 500GB will be enough? I am going to shoot 5-30 minute videos (live music...

Where I come from, the price difference is 80$ and if im still paying 660$ for the ryzen might as well go for 740$ and get the intel one... Right? Or should I just stick to the 8700k?

If i am building a pc, is the 7820x the better alternative since it uses the 2066 socket instead if the 1511 and i can easily upgrade to an i9 down the road without switching the motherboard? Or is this "future proofing" silly and stupid? The pc will be used for video editing (4k 60fps from...

I am going for a phantom 240 case from nzxt, since i REALLY like how it looks. After some research, i found that a Noctua NHD15 just wont fit and im thinking i should get the Corsair H110i AIO and maybe pair it with some noctua fans. Will this work similarly to the NHD15? Im guessing it wont...

I made this list of parts: https://pcpartpicker.com/list/mWN6hy While pcpartpicker says its ok, i wanted to ask here too, to make sure. It's the first time i attempt building a pc so i dont want to make mistakes. What do you guys think? Is it ok? Will it work fine?

I am building my own PC and these are the parts I picked so far: I7-8700K Noctua NH-D15S Cooler Asus Prime B250M-A motherboard Corsair Vengeance 2400Mhz 16GB RAM 2TB Barracuda HDD Samsung 960Evo 250GB m.2 SSD (as a boot drive and to install my IDE's) NoiseBlocker NB-BlackSilent XK2 140mm Cooler...