Recent content by mrsoup1

Which component is it more likely to be?

Received a brand new Seasonic Prime TX-1000 today and tested with it; still facing the same problems. All stress tests inevitably cause a shutdown or BSOD. I honestly have no idea what to do anymore. I'm guessing I now have to buy a new motherboard or CPU and isolate those.

No, my rads are spotless as they are quite literally brand new. I converted my entire build into a custom loop a few weeks ago. It won't be possible to show my voltage values after the test because it always crashes before any test can complete (usually within a minute).

Tried running Prime95 and it bluescreened after 1 minute, this time it was Hypervisor error :( Yes, my radiators are spotless; they are brand new

I am a clean freak so I tend to keep things surgically clean. I also have no heatsinks since my entire rig is watercooled (gpu and cpu block). No dust whatsoever inside the case, only a little inside the PSU but it's too stubborn to blow out with a datavac. I was running HWinfo during the tests...

MemTest is failing/crashing too. Can that also be due to a faulty PSU?

Tried running it again and got BSOD

---------------------------------------------- -- Testing ---------------------------------------------- CPU 1 - Genuine Intel - Pass. CPU 1 - BrandString - Pass. CPU 1 - Cache - Pass. CPU 1 - MMXSSE - Pass. CPU 1 - IMC - Pass. CPU 1 - Prime Number - Pass. CPU 1 - Floating Point - Pass. CPU 1 -...

Thanks a lot for all your input and advice. BTW, I was experiencing the same problems before the custom loop and Aquasuite, as well as IME. Going to go ahead and buy a new PSU and get it refunded if I still have problems.

How confident are you of this? I'm actually hoping it's the PSU. Rebuilding my pc with this custom loop is going to be an absolute fn nightmare (if the mobo or CPU is the culprit). It might be worth nothing that the power test in OCCT is the one which fails the quickest (always within 15 secs or...

@Colif Aquasuite is used to modulate my custom loop parameters and RGB. It was crashing before that too. I also flashed to latest BIOS last night, still no improvement (on the latest version). Tried DDU too but not in safe mode, will give it a shot and see if there's any improvement. The RAM is...

Unfortunately I don't have another PSU to use. I added some of the errors found in Reliability History in the comment above. Will take a look at suggested configs in the manual.

I checked Reliability History and there are a ton of hardware errors (it always coincides with the time of "shut down unexpectedly") : Problem signature Problem Event Name: LiveKernelEvent Code: 124 Parameter 1: 7 Parameter 2: ffffd68ff8d02020 Parameter 3: 0 Parameter 4: 0 OS...

The entire build is under a year old and spotless. I keep everything super clean. These are some things that I forgot to mention, which could be noteworthy: I had a reasonable amount of blackouts (power outages) in the house I was living in before I only have a single 8-pin connector plugged...

I have been having constant BSODS, seemingly out of nowhere, for the last few weeks and I can't seem to diagnose the problem. I have even bought new RAM, as I thought that my old DIMMS might have been the culprit, to no avail. My PC will also completely freeze during OCCT CPU and power stress...