Recent content by NateTech

  1. NateTech

    How do I drain my water cooling loop?

    Thank You all so much! Your help is all very much appreciated, and I will take your advice.
  2. NateTech

    How do I drain my water cooling loop?

    Help! Normally I'm the one giving advice around here, but my knowledge of water cooling is limited. I built this loop and thought it'd be easy to drain it, so I didn't put any thought into it at the time :D. Can this loop be drained easily??? I've put a lot of thought into it and couldn't think...
  3. NateTech

    Which gtx 1070 from my list

    Hello! I'd highly suggest the ₱18,250.00 Zotac GPU, as it provides A LOT of performance for your money, and you wouldn't really notice that much of a difference between any of the other cards. Hope this was of some help! :) - Nate of Ralleon Custom Built
  4. NateTech

    Compatibility of amd a10 to rx 550

    The A10 is decent, and will perform decent. Kyle J-Ron from what it seems already has an A10 system, and is looking to upgrade what he has for a cheap price. Getting a G4560, while it would perform better, would not be smarter for his budget most likely as he would have to spend a lot more money...
  5. NateTech

    Compatibility of amd a10 to rx 550

    Hello! Yes you can use the RX 550 with your processor on its own, but if your question is if you can add n RX 550 to create a multi GPU setup, than no you can't. Hope this was of some help! :) - Nate of Ralleon Custom Built
  6. NateTech

    Pairing gtx 1050 ti with i3 2120

    Hello! Expect decent performance out of this setup, as your biggest hold back will definitely be the 2120. While it is the biggest hold back, that doesn't mean it's bad at all, and I would personally suggest this setup. Some titles might not be able to run well though, so if you could list the...
  7. NateTech

    Q6600 Tape Trick Guide (3.0ghz on a Q6600 with non-OC capable motherboards!)

    Very interesting stuff here. Now I sorta skimmed it as I don' have much time to read it now, but from what it seems this would also work with a q8400? Your input would be very much appreciated.
  8. NateTech

    Will i be able to overclock this ram to 2933mhz

    Hello! The answer to your question is a short and simple yes. This RAM is designed for overclocking and has complete support for Ryzen, you should actually be able to hit 3200Mhz with these DIMM's. Hope this was of some help! :) - Nate of Ralleon Custom Built
  9. NateTech

    a8-5600k + R7 250 combine?

    Yes, the issue was most likely a power connector that was not properly plugged in all the way, as I myself have experienced this before. While I'm sure disabling the integrated graphics or keeping them enabled won't make a difference, I'd still disable it in the BIOS because you have the...
  10. NateTech

    2nd generation i7 vs 6th generation i3

    Hello! My suggestion would be that you get the i5 7500 as it meets your exact budget, and still provides great performance. It is also compatible with lga 1151 so that clears that out of the water. The other thing that needs to be taken into account is what are you doing with your chip. Are...
  11. NateTech

    i3 530 to i5760

    Hello! The upgrade from an i3 530 to an i5 760 really depends on what your doing. If you are gaming than you will notice a decent increase in performance, but if you are simply web browsing of having a slow desktop than this will not help that much. If you are having a slow desktop experience...
  12. NateTech

    A8 7600 APU mediacenter minimal OC

    Hello! In the AI Overclocking Tuner you can set that to manual, and from there you can set the APU frequency higher. 100 Mhz is a decent overclock but you should be able to get more out of that by turning up the APU frequency, and turning up the voltage as well. I'd run the APU through some...
  13. NateTech

    Question about my cooling setup?

    Hello! It sounds like you're saying you have no intake fans, and this would not be a good thing. It's not the end of the world or anything, but I would advise making the fans in the front of the case (attached to the h100i) push air into the case, and leaving the fans in the back to exhaust...