Recent content by Nemesia

Even a non working water cooler which is properly installed would not let your CPU go to 90 instantly. Your CPU cooler is not installed properly on the CPU. It can't be a million things at this point if you tried everything.

Hi Toolyz. What is the rest of your specs? Including the PSU

Hi C1rm0ska. The Standard default clock speed of your RAM is 2133MHz. At the moment your RAM is using the XMP profile to get to 3600MHz. Everything is ok

I use Control + Shift + Delete. It brings you to the navigation saved information and then you just clean everything from "All time". Close and open the browser again after that. You are now disconnected from EVERY accounts from any websites. You will have to enter the login password for every...

Yeah you can. Just keep in mind that when you use something like that or is you use a vacuum cleaner in reverse with a small tip that you should watch out at what distance you blow the air in your computer. You can use that air mattress pump. The principle is the same. Blow air in your computer...

Do you smoke cigarettes? It does that to monitors.

Use MSI Afterburner to set a fan curve where the RPM goes from 2200 to over 2400 so you do not get inside that noise range.

I'd try starting with only 1 RAM installed. Red LED DRAM light could be caused by the CPU. CPU installed too thight and/or bent pins.

Hi asf256. How did you clean your PC?

Sounds like a One Drive message.

Like Lutfij said it could really be a CPU not properly seated (Too much pressure on the CPU affecting the Memory Controller inside the CPU). Normally an XMP profile doesn't do this. Normally the system reboots and tells you the XMP profile coudn't stick or it returns to not being activated.

When a system restart by itself it's normally a power issue or overheating. What is your PSU brand and model and the rest of your PC specs?

Yes it does. I built Ryzen 3600 systems that was able to use XMP profile to 3600 Mhz on the RAM. If a 3600 can do it. Your 5600 can.

https://www.nvidia.com/Download/Find.aspx?lang=en-us Enter your card and it should gives you a few years of drivers.

Hi Proigr3. I would try and reinstall the same drivers version you had before you update. If you still have the issue than it's not related.