Recent content by newinstapatel

Update: So finally I resolved my issue. I identified the problem. Actually after getting new liquid cooler I hadn't replaced the previous backplate and standoff screws. The standoff screws in newer cooler version are shorter hence my pump was sitting tight on screws but it wasn't sitting...

My system is not overclocked. I clicked a picture of my BIOS for you. Let me know if you find any problem in this. View: https://i.imgur.com/j3yF8Kn.jpg After 8 hours I turned on my computer again. The temperature in BIOS started with 55°C and rose to 88°C within 10-15 seconds only. The fan...

I followed what you advised, I let my computer run for 10 minutes on idle. The temperature stayed varied from 50-75°C during that. CPU usage was 5-20%. As soon as I launched Chrome it went up to 98°C again but I immediately shutdown within seconds. Then I removed side of my cabinet and pushed...

Update: Finally after two months and end of lockdown Corsair replaced my cooler. I got new version of H60 with SATA cable attached to pump. I successfully connected my cooler and now I don't get errors: "CPU Fan Error" or "CPU Over Temperature Error" and my computer boots easily. However CPU...

Thanks for narrowing down the main problem. I will contact Corsair to replace my cooler as it is under warranty. I will update this thread after getting callback from them and solution. I'm grateful to you for your help and others' as well.

When I open BIOS and leave with "Discard changes and exit" then I can log in my system. I took pictures for you to analyse so please take a look. 6 pics taken of BIOS and HWmonitor. View: https://imgur.com/a/W36786B

I confirmed on Corsair's official website. My cooler has 5 years warranty so if I need to replace it then they will do it.

Relieved to know that. So now I have two options I guess Reapply thermal paste and recheck temperature If problem persists then I replace my liquid cooler. Will be able to do it only after lockdown ends. I will give update after that.

After reading your message I checked again to feel vibration. I DO feel vibration a little but as you said it's hard to know if fluid is flowing through or not, am I feeling vibration because those pipes are attached to radiator/fan? Fan is working fine. This time check temperature of both...

I could feel the liquid moving though both pipes but I couldn't notice any temperature difference. You said the difference won't be huge so I was extra careful to notice the difference in temperature but couldn't find any. While I was checking that the temperature rose to 72°C within 30-45...

How can I check if pump is working or not? I just pointed infrared thermometer on pump and noticed temperature rising from 42°C to 56°C within 2 minutes and then I switched off my PSU.

Hi, my computer was working well till yesterday but since this morning I'm getting two errors when I turn on my PC. "CPU Fan Error" and sometimes "CPU Over Temperature Error" BIOS - updated to latest version. Fans - All 3 fans are working well including liquid cooled fan for CPU. Cleared off...