Recent content by nirmalvishal

I know I will change it as soon as I move from this country I am in right now, not possible to buy a case here. I can only get someone to bring me the cooler hence the post. I did undervolt it but the gpu no matter what crashes tried everything

That I could have done it in the first place but, the place where I am at right now it's impossible I will have to import case it is too large and heavy so 240mm AIO seems like my only option for next few months my main concern is will the results be similar or better on the AIO. With the AIO...

Makes sense, very bad case Gungnir 100r by MSI it's from a prebuilt intake at the front and exhaust at the back as usual. Since the airflow is bad I was thinking getting an AIO mounted at the top might reduce the heat but if you are saying there won't be any difference between Fuma 2 and freezer...

I am still trying to figure out how people forget to remove the foil, there is no way I would ever do that.

I have had the same problem with a different case the fan would hit the RAM try doing the front mount switch the orientation of the fans before doing it maybe but your GPU will run hot if it doesn't you are good to go. Also try to repaste and change the thermal pads on your GPU, helps a ton. I...

I recently imported a prebuilt pc due to customs my only option was to buy MSI aegis. As expected the CPU temps were off the charts, even started crashing so after a bit of research on Reddit and youtube I decided to import the FUMA 2 for my intel i7 11700k. It handles it well, but temps are...

True I need to move on, I am just kinda jealous about my mate lol. He has the same 11700k cpu and a lot more hotter chassis and a lower tier cpu cooler master hyper 212 . He ends up getting max 60c to 65c while gaming and that worries me. I am in fact so disappointed with this cpu I will change...

Thank you for you response it really helps with troubleshooting this issue. 1) The chassis has really bad with the airflow so I bought 4 additional cooler master fans to make the airflow better. And it does definitely helps over the stock fans I got with this cooler. I have tired every...

looks like I might have partly fixed this ambient issue. I am getting around 77c while stress testing and the ambient temps now are around 41c to 45c it turns out there was a rogue process running in the background without any signature I had to just delete it and now the ambient temps are below...

I am more of a troubleshooter myself thanks for the info I have tried that variation too even with the case completely open. I basically tried everything and now looking for help. With the intake, the thing that works for me right now is 1 Fan IN and the other one OUT on the TOP. Res all is a...

Intel i7 11700k runs hot, cannot find default settings and configuration for this processor, or is it a defective piece, maybe motherboard issue too. Recently bought a prebuilt, the system ran hot so I upgraded to a pretty decent cooler based on the suggestions I got on the web but I am still...

I ran the CPU-z test getting around 77c is that ok? with the paste, I did the criss-cross pattern, not much of a difference. the next few times I started smearing it but used a different brant the tube comes with a flat applier so I had to follow the given instructions which were to smear it...

how do I know if it a defective cooler, is there a way to test it. Well if I go into the bios settings I get around 43c to 45c idle temps. Returning it is not possible I had it shipped all the way to uganda so it was a gamble the cooler seems all right. I got it touch with the online support and...

I have also tired that variation, will try it again. I also tried to do it the other way where the first fan on the top pushes in air while the other out pushes out very negligible change in thermals 2c or 3c change here and there max.

View: https://imgur.com/a/gtFcyJK here is what it looks like take a look.