Recent content by nonag

Hmm... I ran the Memory Diag Tool again and this time it said no errors detected. A few hours ago it detected 2 bad pages. Only difference is I choose "Run as administrator" when running the Memory Diag Tool. BIOS is already up to date as per what is on Asrock's website.

Hi All I have a PC that was built more that a year ago: -- Motherboard - Asrock z690i -- CPU - Intel 12700k -- RAM - GSkill F5-6000J3238F16GX2-FX5 The RAM specification is for 6000MTS but under the task manager it showed up as 4800MTS. I did some google searching and I ended up updating the...

Hi All, I'm looking for a SFF case for an ITX motherboard that has a traditional layout with a glass panel. I ran into the Jonsbo Z20 and notice it is advertised as a case for mATX board. Can I still use an ITX mobo in the Z20? Is that an option for the Z20? Build so far... pcpartpicker...

I downloaded the Aura software and ran it once. That seems to have fixed it. Thanks!!

Hi All, The RGB lighting on my CPU cooler just stopped working after about 11 months of use. The fan spins fine but the RGB lighting is off. CPU cooling fan is ID-COOLING IS-55 ARGB cooler low profile MOBO is ASUS ROG STRIX B-550A the PSU is a Seasonic GX-550. The RGB connector is connected...

Yes - that is what I changed it to. Thanks to all for pointing that out. Just curious - is the loss / gain significant and how would one tell ?

Thanks for pointing out :) hmm.. I checked the manual for this MOBO just now and it seems to be in slots A1 A2. ROG STRIX B550-A GAMING User’s Manual see page 14 of the PDF and it shows the MOBO layout. How should it be... different letters but same number? Like A1 B1 or A2 B2 as you mentioned.

For streamlining the airflow, has any one tried to covering the open gaps inside their PC case? I know it will never be close to 100% seal as it is not meant to be but I just want to know of options that could be available. Please see pictures...

Responding to my own thread :) This part did the job for us: EZDIY-FAB GPU VGA PCIe 8 Pin U Turn 180 Degree Angle Connector Power Adapter Board for Desktop Graphics Card-Reverse Type 3-Pack

This should be the link: https://www.leadtek.com/eng/products/graphics_cards(1)/WinFast_RTX_3070_AI_BLOWER_8G_REV_A(30908)/detail

In our itx setup we have a 3070 blower style gpu. I'm looking for a 90 degree power adapter at the gpu end. Can anyone please point to a solution? I'm trying to free up some space so I can put an NZXT x53 AIO cooler next to it. Please have a look at the pics.... The PSU that is installed is a...

Thanks

Yeah splitting is the option I’m looking at.

That cooler is not listed on the motherboard’s compatibility list.

Here is the manual for that mobo: https://download.asrock.com/Manual/Z690%20Phantom%20Gaming-ITXTB4.pdf see page 30 - it says the the one USB 2.0 Header can support two ports. What does that mean?