Recent content by Norduc

When I set it to raid mode the laptop still wouldn’t boot and the drive doesn’t even show up in the boot list. I should add that previously before trying to do a clean install the laptop worked just fine booting from the original hard drive.

I decided to do a clean Windows 10 install on my ROG g752vt, but after installing windows 10 on the nvme it wont boot to windows. The BIOS only even lists the drive as a boot option when CSM is enabled and the SATA mode is set to AHCI. I have tried every combination of boot and storage...

New cpu fixed the problem. PC is running great.

I have a fury x, but in testing it made no difference that I used it or not. I don't believe it could be the motherboard as I have gotten the same symptoms on a different board. I know someone who might let me borrow a cpu to test with in the next couple of days.

Update: I was just able to get it to the bios by resetting the cmos, booting, then jumping the reset switch. It didn't post at all, just went straight to the bios. However about 2mins after booting it froze in the bios and I had shut it off. Now I am back to the original situation.

I just tested with a single input monitor and it still won't display.

I just tried it using my GPU and monitor but still no display. I am worried the only thing left is the CPU.

Just checked. There are no bent or missing pins.

Damn. Thanks anyway.

So sorry for the late reply!! 8pin is plugged in and secure. All used parts but in good condition. I have reset the cmos through the jumper and battery.

I am having a very similar problem. Were you able to find a solution?!

Also should add that I have only tried using hdmi and with no gpu attached.

My TV gets no signal from the pc. I have pulled everything from the case, tested other ram, other mobo, other psu, reset cmos, tried all ram slots, and reseated everything multiple times. The dram debug light lights up when powering on, but quickly goes away. I am very sure all my cables are...

Edit: The light for the gpu has come on but I have no gpu. The screen doesn't say no signal but is black.

I recently got a new motherboard, the msi b150 gaming m3. I plug everything in and there was no video signal. The motherboard has 3 debug lights that tell you what component has failed however none came on. Will these debug lights turn on if my CPU won't display or just if it is totally shot...