Recent content by obiwan05

  1. O

    Zalman's Thanksgiving SSD Giveaway!

    Finally a worldwide giveaway!
  2. O

    port replicator monitor troubles

    it should be the same version of windows, but does not need to be the same cd (ie xp pro or xp home or whatever). It is quite probable that the new driver you installed set the refresh rate or display resolution to one that the crt cannot display since extending worked fine. Or on seconed...
  3. O

    ps/2 port easy question

    if you like your keyboard/mouse combo get an active ps/2 to usb adapter. It will have 2 ps/2 inputs for the keyboard and mouse and a single usb plug to plug into your computer....
  4. O

    Automatic Shut Down

    run coretemp or similar. had a similar issue recently where the cpu was over heating and system board was shutting it down (bad seating of heatsink). By the time I fully tracked down the problem I had apparently fried the cpu, oh well.
  5. O

    LG ggc-h20l Blu Ray/HD Dvd player - Vista cannot detect it

    The drive is getting power? Does the bios see the drive? Can you boot from the drive?
  6. O

    HTPC sound card recommendations

    thanks! I'll take a look and see if I can find locally...if not I see ncix and tigerdirect have it.
  7. O

    HTPC sound card recommendations

    Hello all, I'm looking for a new sound card for the HTPC I am putting together. PC will be playing back HDDVD/BluRay/DVD/5.1DD Satallite/DD/Multi-channel encoded video files. PC will be connected (via toslink/coax digital/analog?? and DVI) to an Outlaw Audio 990 A/V Processor. My current...
  8. O

    cannot boot desktop pc

    what are the beeps codes being produced? I'd agree, either a bad ram stick (try 1 stick at a time if you have more than one) or video card but the beep codes should indicate which.
  9. O

    Blu Ray Problems

    If it is a HDCP issue, you could also give DVD Anywhere a shot which removes the HDCP requirement....
  10. O

    New PC Built, Unable to Install OS

    I did not see mention of your optical drive in your config. Is it IDE or SATA? If it is IDE, what do you have it jumpered to, Master, Slave or Cable Select? If it is set to Master, try cable select or vice versa and then slave as a last resort. Failing that, do you have access to a SATA...
  11. O

    First Build, BIG Problems

    shro - I generally sit mine on top of the box the motherboard came in on my desk when I do the initial setup prior to putting it in the case... could put it right on the desk if you wanted to... just not on top of a static bag, plastic bag, Styrofoam, etc...
  12. O

    First Build, BIG Problems

    start at the basics... disconnect everything except video, one stick of ram and the power supply. You might want to take everything out of the case again too while doing this to ensure you do not have a short somewhere..
  13. O

    HTPC - Min Requirements

    I think you will have a hard time finding a PCI video card that will do 1920x1080. The Dimension 2400 only has 3 PCI expansion slots, no AGP or PCI-Express.
  14. O

    HTPC - Min Requirements

    What kind of inputs are on your tv? hdmi or dvi? I just through together a second htpc for the bedroom that will be hooked up to a crt and it works fine: amd xp 1800+, 512mb ram, ati 9600 series agp card, 40gb hd, 802.11g wireless nic and a blue tooth wireless keyboard and mouse (rf would have...
  15. O

    Home NAS

    not copying from Vista are you? USB copy + nework copy = VERY LONG wait :( If you had an older computer lying around and available harddrives, I would recommend unRAID from Lime Technologies. A linux 'raid' solution that boots from a usb key that you can run with or without a parity disk and...