ohm-ish

Latest activity Postings Featured content About Trophies

• • O

    ohm-ish replied to the thread Question Disconnects in games and slow loads, but fine speed.

    Thanks for input I think it's solved I was using some smaller antennas instead of the ugly chorded one that came with the motherboard...

    Oct 22, 2023
  • O

    ohm-ish reacted to bill001g's post in the thread Question Disconnects in games and slow loads, but fine speed with Like.

    That was somewhat of a surprise that you actually have a AP, most people just use the term for things that aren't. I would check all...

    Oct 22, 2023
  • O

    ohm-ish posted the thread Question Disconnects in games and slow loads, but fine speed in Wireless Networking.

    Hi I got a new computer with motherboard Asus Z790-I Gaming wifi In certain games the connection simply drops or can't connect. And...

    Oct 22, 2023
  • O

    ohm-ish replied to the thread Question Help with undervolting an i5-13600 on Asus mobo ?.

    Ok I realized that I was undervolting the wrong thing in bios.. I should lower the VRM core voltage, not the L2 So now I have...

    Oct 20, 2023
  • O

    ohm-ish posted the thread Question Help with undervolting an i5-13600 on Asus mobo ? in CPUs.

    Hi Got my new rig going: CPU: i5-13600k (5.1ghz) Motherboard: Asus Z790-I Gaming Wifi RAM: G.Skill Ripjaws S5 DDR5 6400MHz 2x16GB (XMP...

    Oct 20, 2023
  • O

    ohm-ish reacted to Graveboot's post in the thread Need Help Underclocking My Cpu Please! with Like.

    Oct 19, 2023
  • O

    ohm-ish reacted to Firdausy99's post in the thread Question Different CPU Ratio and CPU Cache. I want to underclock my CPU with Like.

    My CPU is i7-4790K with FSB 100Mhz i think cause it max x40 when I set in Bios. And I don't know how to determine the correct CPU...

    Oct 19, 2023
  • O

    ohm-ish replied to the thread Question How to check if everything is running PCIe 4.0 or 3.0 ?.

    Ok I looked in manual and found the way to force x16 for the graphics card in bios And it works. Card now runs 4.0 x16. And I checked...

    Oct 17, 2023
  • O

    ohm-ish reacted to SkyNetRising's post in the thread Question How to check if everything is running PCIe 4.0 or 3.0 ? with Like.

    Because you have not forced M.2 slot into gen4 mode. In gen5 mode (or auto) M.2 slot is using PCIE lanes from CPU (and just downgrades...

    Oct 17, 2023
  • O

    ohm-ish reacted to Eximo's post in the thread Question How to check if everything is running PCIe 4.0 or 3.0 ? with Like.

    You may be right. That board is expensive enough to justify putting a PCIe switch chip in there. So according to the manual you can...

    Oct 17, 2023
  • O

    ohm-ish reacted to thestryker's post in the thread Question How to check if everything is running PCIe 4.0 or 3.0 ? with Like.

    Unless Asus is lying on the specs page and in their manual this is incorrect.

    Oct 17, 2023
  • O

    ohm-ish replied to the thread Question How to check if everything is running PCIe 4.0 or 3.0 ?.

    Ok. I wonder why the GPU is in x8. As I recall the bios is set to auto pcie mode, so it should use x16?

    Oct 17, 2023
  • O

    ohm-ish replied to the thread Question How to check if everything is running PCIe 4.0 or 3.0 ?.

    But raising the GPU to x16.. won't that lower the NVMe bandwidth instead then? or give it more latency

    Oct 17, 2023
  • O

    ohm-ish replied to the thread Question How to check if everything is running PCIe 4.0 or 3.0 ?.

    Hm ok that's something I really want to avoid ;) I read that "PCIe 4.0 x8 is close to equivalent bandwidth to PCIe 3.0 x16" So that...

    Oct 16, 2023
  • O

    ohm-ish replied to the thread Question How to check if everything is running PCIe 4.0 or 3.0 ?.

    Ah I see btw my graphics card went to say PCIe x16 4.0 @ x8 4.0 in gpu-z when I did the render test Maybe that's fine for a gfx card...

    Oct 16, 2023

  Show older items
• Loading…
• Loading…
• Loading…
• Loading…