Recent content by oldplod

The problem is I live in Romania , so i don`t think i can buy off of newegg . And after buying 2 sticks of ram (40 $) i`m out off money untill i can sell them . I allready have 4 gb and i just want 8 . With my rig , 16 gb would be an overkill . I only have a gtx 650 and an i3 540 . it`s not...

Yes but with my clarkdale I3-540 it supports 1067 , 1333 and 1600.. It`s just the last number that`s different in the code . You can see the clarkdale ram support sheet . And i`m planning to make it run at 1333 mhz to "TRY" to match it with another stick . LE : because i`m stupid

Asus P7h55M-PRO . Link : https://www.asus.com/Motherboards/P7H55M_PRO/

I had trouble before with compatibility on my motherboard with 2 sticks now. I just sold a DDR3 1333 mhz stick that didn`t work with my pc . Same specs as my old one . It just didn`t work

Hello . So i want to buy a 2x2Gb Corsair RAM kit with the code CMX4GX3M2A1600C8 . Will my motherboard support this ? I found on the list that my motherboard can support That it can support the corsair kit with the code CMX4GX3M2A1600C9 . Only the last number is different . Can it run it ?

I managed to get past the boot screen by putting the old ram in the first slot and the new one in the second. Now it restarts when windows starts to load but i can enter bios and mess with the timings . I noticed that the REF cycle time is 200 for the new ram and 108 for the new one and i think...

I can`t return it because I bought it second hand , it`s not new . I know for a fact that it works so it`s not that . And the pc boots only with the old one . With the new one it just gives me a blue screen . I think my motherboard may be forcing it with wrong timing. This is the second ram...

Specs: MB : Asus P7H55M-PRO CPU: Intel i3-540 HDD : WD Caviar Black 500 Gb GPU: Nvidia GTX 650 1 Gb OC edition OS: Windows 7 x64 Current RAM : Silicon Power - sp004gbltu133v02 4gb DDR3 1333 Mhz CL9 http:// Now my problem is this : I bought a new stick of ram called Kingmax flff65f-d8kq9 4Gb...

Should I try to force some other timing ? I found online that the kingmax has the timing 9-9-9-27 while i couldn`t find exactly what timing the silicon power has except for 9-9-9 . Should i try to increase the voltage ? They both should run at 1.5v ... I tried disabling xmp profiling , forcing...

Here are the screenshots for the old ram : http://imgur.com/a/GAv4r http://imgur.com/a/hebyZ I tried forcing 10-10-10-30 timing for the new ram only to get a IRQL_NOT_LESS_OR_EQUAL BSOD . Then i tried forcing 7-7-7-24 and that made the pc to give no image to the monitor untill i cleared cmos.

Ok , so I bought another stick of ram instead of the kit I wanted to buy . It`s a Kingmax flff65f-d8kq9 . It`s 4gb , 1333 Mhz . Now when i try to run both of them my pc freezes at the bios screen and it doesn`t get past that . I only tried allternating them in the blue slots of my motherboard ...

I will pick them up tomorrow and try them out . Does it affect performance if it will run in single channel instead of dual channel ? Btw I checked with my mtb`s supported ram and it`s in the list .