Recent content by Omnimox

So should there not be +3.3V on pin #3? Because there is. Only during standby and shutdown there is 0V

Im aware, that one has 3.3V. There is a bridge between the first 3 pins and they all get 3.3V from the first wire

You mean the 3rd pin? I can confirm per diagram, if the first wire has 3.3V then the first 3 pins also have it. https://ibb.co/6B3fBxQ I cant rly measure the individual pin without breaking the plug but it should definitely have 3.3V The 3rd wire has 5V Edit: Unfortunately blocking the 3.3V...

There are 3.3V coming from the SATA power connectors first wire while in OS. That would include the first 3 pins i assume, kinda didnt want to short anything at the tiny pins so correct me if thats not the case but i dont see why it wouldnt. https://ibb.co/rtfWrBh So the SSDs are put into...

So i was able to narrow it down a little further. All i need to do is unplug the power of the SSD and replug it (while in OS) and it comes right back to life. This also works while in BIOS but it doesnt show up instantly. But if i boot into OS from there the drives are detected. And the problem...

Seems to be a different problem then. Both SSD appear in windows. I shutdown PC, boot into bios and they already are both gone. I wait 1 min and save+reboot, they still are gone in Windows. Any other ideas? SMART looks good to me View: https://imgur.com/a/eHQfhhs Thats a great idea but not a...

This sounds very plausible but how would i go about fixing this issue?

SSD disappears after standby/shutdown/crash I have 3 SSD. A Samsung EVO 480, EVO 860 and EVO 870, All connected per SATA cable. This problem only affects the 860 and 870 which are V-Nand. The 870 was brand new and instantly had the same problem as the 860 already was having. The problem...