Recent content by Ompted

Another note, I noticed my voltage on a 2 or 3 active count will sit around 1.36 to 1.45 volts, but under a stress test; my voltage drops to 1.38 to 1.4 and stays rock solid there at 16 core full load.

My asus mobo won't let me undervolt my cpu. I have I i7 13700k. My motherboard will let me select offset and set to negative, but everything remains on auto. I tried resetting the setting to default, but nothing allows me to modify it. Any ideas what bios setting might be responsible for this?

Max load as in 100%. Cpu-Z stress test, The AIO is controlled by the CPU Fan on a 3 pin connection by the controller provided with the corsair aio. It's a h150i elite lcd xt 360mm aio. I have it set to balanced and the pump to extreme. My room sits around 65 to 80 depending on the day. I mainly...

I have a 13th generation i7 13700k. I have updated to the latest bios and have a 360mm cpu cooler. Case has good airflow. My mobo is a asus tuf gaming z690-plus wifi d4. Is there any offsets I should start with voltage to lower the temps? I run about 90C max load. I know these things run hot...

Recently I noticed my Core Isolation wasn't enabled after I had my PC formatted because someone hacked my computer with a infected file. I don't know if it was remnants from a USB they used with the reinstallation or a leftover drive. Both drives are CH375W64.SYS reading as a USB module with a...

I understand that when I use the term "Bottleneck", it's just a way of saying what my maximum FPS will be at my current stage with the parts I have. Any and al knowledge I have is from working on my own stuff and figuring it out on my own. I'm still kinda new to PC stuff so I wouldnt be...

Exactly, so I have no idea why he was saying that. Would there even be a slight bottleneck?

He was using PCpartpicker, I researched through various websites and decided this one gave the most honest result. https://www.gpucheck.com/gpu/nvidia-geforce-rtx-2060/intel-core-i7-4790k-4-00ghz/ Every benchmark I watched was able to keep pace and was within that 100FPS range. I do know the...

Gaming, sometimes low end video rendering for soundboards.

Currently I have a GTX 1070 SC with a i7-4790k overclocked to 4.6 ghz. I know it's a older build, but I am replacing the GPU with a RTX 2060. I have 16 GB of RAM and all of my software is on SSDs or M.2s. A co-worker of mine has been telling me the GPU will be bottlenecked by the CPU by 46% or...

View: https://imgur.com/a/zYDfSOR View: https://imgur.com/a/pnyQwjY Both sticks show slightly different clocks but im not sure if that makes any difference.

After going through CPU-Z I noticed that the bios was never updated. In terms of XMP. Im going to update the bios and retry to enable it after a bios reset. What would be the best way to OC it, just enable XMP and leave it be, or is there another approach. I'm not entirely familiar when it comes...

View: https://imgur.com/a/EwE9MjF I did have a multitude of profiles to select from. But I'm weary of selecting the wrong one.

It should fire right back up at 1600mhz because its the same exact kit I used. Same brand everything. I don't think it was ever OCed to its original clock.

GPU: GTX 1070 SC Kboost enabled CPU: I7 4790K OC to 4.5 Ghz RAM: 16 GB DDR3 1600 MHZ RIPJAW Dual stick Mobo: Gigabyte Z97X-SLI Been trying to enable the XMP on the mobo but each time I enable and restart the PC. Its giving me bad ram codes. I recently replaced the RAM and it runs fine at...