Recent content by Oyavo

Sorry about that, hopefully this should be a little clearer. To be honest it's probably more out of stubbornness and confusion in that a drive which I nearly ~$200 CAD on after tax for extra storage has somehow resulted in effectively the same storage, especially when the drive appears to be...

I'm not opposed to the idea, they aren't too expensive so I might get one anyways. Thanks for the heads up Is there any way to prevent BIOS from timing out the drive without the adapter regardless? The parts that are confusing me are specifically that this all occurred precisely when I...

Currently, the drive is completely empty and all that was on it has since been transferred. Would accessing this port still be worthwhile? Otherwise, I'm not quite sure what to make of the read//write error information as it seems strange for such an error to show up only once an SSD was mounted...

At the moment, while I unfortunately do not have another system to connect to via sata port, it works via USB adapter on MacOS read/write no problem whatsoever. I can't quite see any damage on the pins from what I can make out though I could be mistaken. Unfortunately the pins are so small that...

Unless I'm mistaken, I was under the impression that the following information was part of the drive health: C:\Windows\system32>wmic diskdrive get status Status OK OK Where the first line was my NVME and the second was the 2TB hard drive, with nothing else plugged in at the moment...

Bios version is E7C02AMS.3K2 (08/30/2024), which I believe I installed back in January when first trying to fix this issue. It's possible that it could be the drive itself I suppose, as there's nothing I've seen to indicate my power supply having issues and I've tried two separate sata power...

I reset BIOS to default yesterday with no luck unfortunately. I suppose it's possible that the drive is failing, I've heard it (or at least, assume that was it) make a sort-of thump sound once in awhile but that noise occurs maybe once a week and has been occurring nearly the entire time I've...

Here are the results of that search; PS C:\Windows\system32> Get-PNPDevice -Class DiskDrive Status Class FriendlyName InstanceId ------ ----- ------------...

Here is a photo of sata ports 1 & 2, and sata port 3 connected. I apologize for the potentially unclear photos, however I can assure you that nothing is plugged into ports 5 or 6, and at the moment the problem drive is plugged into port 1 (with the 500 GB HD plugged into port 2 and the 256 GB...

It's been awhile since I've fully removed the NVME (this problem has been going on since January) so I'll have to try again, however from memory I believe removing the NVME allowed for the 2TB hard drive to reappear in bios, however otherwise it is entirely absent. My apologies, I do have both...

That is correct, the drive will show up anywhere from 30 seconds to upwards of 10 minutes after booting up, and has never shown up in bios since the installation of the NVME ssd. My apologies, I actually do have both a 500GB and a 2TB hard drive but formatted my post incorrectly. The 500GB one...

I've updated the post with more information, please let me know if any further info is needed. I've already consulted the manual, and while SATA 5 and SATA 6 should be disabled, I am only using SATA 1-3 with the problem persisting across all three for exclusively the 2TB hard drive.

Back in January I bought a Samsung 990 EVO 2TB SSD NVME, and installed it into the M.2 slot. Since then my 2TB Hard Drive is completely unrecognizable by my PC unless via a SATA to USB adapter, yet my older 500 GB HD and 256 GB SSD are completely fine. NOTE: SATA ports 5 and 6 are disabled on...